Page 1 of 1

FS - LimeSDR Case, front/rear panels and set of u.FL to SMA leads

Posted: Thu May 23, 2019 1:30 pm
by G8PEF
Extruded black anodised aluminium case, plus set of front/rear panels, pcb mounting lugs and blanking pieces for LimeSDR, and set of 12 u.FL to SMA (f) leads, 100mm long. Bought a little while ago, but my plans changed, so they’re now sitting around
Brand new, so looking to recover what they cost me (£27)...
Looking for £30 posted, or feel free to make a (sensible) offer - you /might/ get lucky :)
Payment preferably by PayPal F&F to avoid fees.

I’ve tried to attach pics, but it won’t let me - PM or email me if you’d like pics.

(EDIT: Added the case that I thought I'd lost to bundle - and also see below for pics, kindly posted by Mike - note that this case is black anodised, rather than the gold shown in MIke's pictures)

73
John G8PEF

Re: FS - LimeSDR front/rear panels and set of u.FL to SMA leads

Posted: Sat Oct 05, 2019 11:39 am
by G8PEF
Updated!

Ive now found the case that had gone AWOL, so looking for £30 posted or near offer.


John, G8PEF

Re: FS - LimeSDR front/rear panels and set of u.FL to SMA leads

Posted: Sat Oct 05, 2019 11:53 am
by g0mjw
This what you mean? I have one already...
1.jpg
1.jpg (119.78 KiB) Viewed 4707 times
2.jpg
2.jpg (140.87 KiB) Viewed 4707 times

Re: FS - LimeSDR front/rear panels and set of u.FL to SMA leads

Posted: Sat Oct 05, 2019 7:40 pm
by G8PEF
Yes, Mike - exactly those :) Thanks for posting the pics - I couldn't manage to get the forum to accept mine (possibly too big -direct from phone's camera).
For the benefit of any potential buyers, there are also 4 little PCB mounting lugs (which allow the PCB to slide into the guideways in the aluminium extruded case shown, and some small blanking pieces to change the size of the 'USB hole' to suit whichever version of the LimeSDR you have.

73, John
G8PEF

Re: FS - LimeSDR Case, front/rear panels and set of u.FL to SMA leads

Posted: Tue Oct 15, 2019 9:39 pm
by G4uvz
Looks really nice...but I am confused..my Lime Mini USB has just 2 SMA connectors TX and RX ..what on earth are the other 10 SMA's for???

Re: FS - LimeSDR Case, front/rear panels and set of u.FL to SMA leads

Posted: Tue Oct 15, 2019 9:52 pm
by G8PEF
G4uvz wrote:
Tue Oct 15, 2019 9:39 pm
Looks really nice...but I am confused..my Lime Mini USB has just 2 SMA connectors TX and RX ..what on earth are the other 10 SMA's for???
Hi,
This case and panels are meant for the 'full-size' LimeSDR, rather than the Lime Mini.
I guess you could repurpose it for a Lime Mini if necessary - there's plenty of room - although you'd have to figure a way to retain the Mini in place without putting stress on the USB connector, which is quite vulnerable to parting company with the PCB...

In answer to the other part of your question, though, the LimeSDR has 4 TX outputs (2 'High' frequency, 2 'Low' frequency), 6 RX inputs (2 High, 2 Low, 2 Wide) a ' Clock' (10MHz Reference) Input, and a Clock output (copy of what went in on CLK in).

73
John, G8PEF

Re: FS - LimeSDR Case, front/rear panels and set of u.FL to SMA leads

Posted: Wed Oct 16, 2019 8:12 am
by G4uvz
Thanks John for the info..that explains all...I will stick with my old 'ex Microwave Modules' converter diecast box...If it ain't broke etc etc

A