Those errors are still saying it cannot see the Pluto.
You could try the following.
Log in using SSH and try pinging the Pluto to check it is responding.
You should see multiple 64 byte messages confirming the connection.
If that fails then check the configuration of the Pluto
Code: Select all
sudo mount /dev/sda1 /mnt
more /mnt/config.txt
This should show the Pluto config file.
In the [NETWORK] section it should read
hostname = pluto
ipaddr = 192.168.2.1
ipaddr_host = 192.168.2.10
netmask = 255.255.255.0
Colin G4EML