BATC Forum

I have just released two small updates to the Langstone and Langstone V2 software.

1. Touching the S-Meter will now switch the displayed text (underneath the bargraph) between S-Units and dBs. The dB readout is in steps of 1dB and should make aligning antennas and comparing signal levels easier.

2. CTCSS tone added for FM transmit. There is a new settings entry to select the CTCSS tone frequency. Setting a frequency of 0.0 Hz disables the Tone.

Colin G4EML

Hi Colin
Just done the Langstone update and ctcss works great on our local repeaters.
Thank you for such a rapid response, A great piece of gear is now even better.
73 Arthur
G4CPE

Superb service Colin - it does pay to go to rallies and events and talk to the designers

Thanks again

Noel