Lang_TX.py failed to load

Forum for discussion about the Langstone Microwave Transceiver that shares some features with the Portsdown. Wiki: https://wiki.microwavers.org.uk/Langstone_Project
User avatar
keng8vdp
Posts: 143
Joined: Tue Mar 15, 2016 8:51 am

Re: Lang_TX.py failed to load

Post by keng8vdp » Tue Jul 06, 2021 6:14 pm

Yesterday after obtaining a Pluto I tried Langstone for first time.
I had the same result. Failed !

I can see im going to need to help ! Thank you all you clever persons

Ken

G8GKQ
Site Admin
Posts: 2798
Joined: Sun Mar 22, 2009 1:21 pm

Re: Lang_TX.py failed to load

Post by G8GKQ » Tue Jul 06, 2021 6:18 pm

Ken

I hope to come up with a proper fix for this tomorrow, but in the meantime, if you do a Portsdown update and then try the Langstone again, it might work.

Dave, G8GKQ

User avatar
keng8vdp
Posts: 143
Joined: Tue Mar 15, 2016 8:51 am

Re: Lang_TX.py failed to load

Post by keng8vdp » Tue Jul 06, 2021 6:42 pm

G8GKQ wrote:
Tue Jul 06, 2021 6:18 pm
Ken

I hope to come up with a proper fix for this tomorrow, but in the meantime, if you do a Portsdown update and then try the Langstone again, it might work.

Dave, G8GKQ
Just tried that Dave .... no luck

G8GKQ
Site Admin
Posts: 2798
Joined: Sun Mar 22, 2009 1:21 pm

Re: Lang_TX.py failed to load

Post by G8GKQ » Tue Jul 06, 2021 6:49 pm

OK I'll work on it tomorrow.

Dave

User avatar
keng8vdp
Posts: 143
Joined: Tue Mar 15, 2016 8:51 am

Re: Lang_TX.py failed to load

Post by keng8vdp » Mon Jul 12, 2021 11:55 am

Further to my mesage above:
Langstone now working for me. After SSH and as Rob suggested ( sudo apt-get -y install gnuradio )
Very exciting thing to mess with.
Today Im hoping to do some on air tests with Mel G8EOP ssb 2.3ghz.

Thank you all for your invaluable help.

Ken G8VDP

Post Reply

Return to “The Langstone Microwave Transceiver”