Langstone Update 25/05/22

Forum for discussion about the Langstone Microwave Transceiver that shares some features with the Portsdown. Wiki:
Post Reply
Posts: 505
Joined: Thu Apr 26, 2018 9:36 am

Langstone Update 25/05/22

Post by g4eml » Wed May 25, 2022 4:45 pm

I have just released two small updates to the Langstone and Langstone V2 software.

1. Touching the S-Meter will now switch the displayed text (underneath the bargraph) between S-Units and dBs. The dB readout is in steps of 1dB and should make aligning antennas and comparing signal levels easier.

2. CTCSS tone added for FM transmit. There is a new settings entry to select the CTCSS tone frequency. Setting a frequency of 0.0 Hz disables the Tone.

Colin G4EML

Posts: 36
Joined: Fri Sep 02, 2016 9:04 am

Re: Langstone Update 25/05/22

Post by arthur21 » Wed May 25, 2022 6:59 pm

Hi Colin
Just done the Langstone update and ctcss works great on our local repeaters.
Thank you for such a rapid response, A great piece of gear is now even better.
73 Arthur

Posts: 1615
Joined: Wed Apr 07, 2010 6:26 pm

Re: Langstone Update 25/05/22

Post by g8gtz » Thu May 26, 2022 8:51 am

Superb service Colin - it does pay to go to rallies and events and talk to the designers :-)

Thanks again


Post Reply

Return to “The Langstone Microwave Transceiver”