(It's a pure coincidence that the Lime RFE is featured in this month's Radcom. I didn't know that was going to happen!)
The Lime RFE should be connected using the USB connection and will automatically be detected and used by Langstone V2.
This will work with both the Adalm Pluto and the Lime Mini versions, but the Lime RFE will not cover the entire frequency range of the Pluto.
If you don't need the Lime RFE support then there is no need to update. No other changes are included.
The LIme RFE is quite expensive but it does provide a simple way of getting a reasonable power output and receive sensitivity on all of the bands (up to 4GHz) covered by the Langstone.
what would happen if 5.7ghz was selected on a Pluto?
Would it be sent to the wide band channel 100-4000mhz OR
Is there any way of switching the 5.7 to bypass the RFE already available
I haven’t tested it with RF using a Pluto, I just confirmed that it was controlling the RFE.
Selecting 5.7 would enable the 1-4GHz channel as that is the highest frequency available in the RFE. I don’t know how much (if any) gain there would be at 5.7GHz.
There is no straight through mode in the RFE so it would need multiple external relays to bypass it. They could be controlled using the band select bits on the Pi.