RX and TX offset adjustment

Forum for discussion about the Langstone Microwave Transceiver that shares some features with the Portsdown. Wiki: https://wiki.microwavers.org.uk/Langstone_Project
Post Reply
F1SSF
Posts: 93
Joined: Sat Nov 25, 2017 5:14 pm

RX and TX offset adjustment

Post by F1SSF » Sun Aug 01, 2021 10:20 am

Hello word,
I test this very good software but is there a solution to adjust quickly TX and RX offset for QO100 in Setting menu, because I use VFO, and I turn, I turn ........ :o no direct entry ??
I must miss something, sorry.
Thank you
73 Franck
Top
g4eml
Posts: 752
Joined: Thu Apr 26, 2018 9:36 am

Re: RX and TX offset adjustment

Post by g4eml » Sun Aug 01, 2021 10:37 am

Use the left and right mouse buttons to select which digit to adjust. The same as when tuning.

Colin.
Top
F1SSF
Posts: 93
Joined: Sat Nov 25, 2017 5:14 pm

Re: RX and TX offset adjustment

Post by F1SSF » Sun Aug 01, 2021 1:16 pm

Hi Colin
I have found, the cursor for adjustement offset is on main display, sorry... ;)
Thank you
73 Franck
Top
Post Reply

Return to “The Langstone Microwave Transceiver”