BATC Forum

I have a Lime SDR mini and want to use it on my Windows 11 PC with DATV Easy software. When I start the stream I see an unmodulated RF carrier on my spectrum analyser on the wanted frequency, and I'm able to change the output level with the slider, but no modulation.

What is wrong? Do I need to user other drivers or install special firmware on the Lime SDR? When I use it with my Portsdown it's working fine.

I use Windows 11 and a lime and DATV easy and it works fine. You need to install the ftdi drivers otherwise windows installs the wrong driver.

https://ftdichip.com/drivers/d3xx-drivers/

Hope this helps 73 John

I already found the probleem. I removed the DVB firmware, now it’s ok.

Excellent