Filter Modulator Board

The place to discuss the use of the LimeSDR Mini for amateur TV applications
Post Reply
gi3vaf
Posts: 11
Joined: Thu Apr 05, 2018 6:01 pm

Filter Modulator Board

Post by gi3vaf » Sat Jan 12, 2019 2:18 pm

I'm not sure how to use the LimeSDR mini in the original Portsdown with respect to the filter modulator board as to whether or not the latter should be physically disconnected. The impression I get from the Wiki is that this is not necessary and one should go into Console Mode to select 'Output to' Lime or? Perhaps the procedure is obvious and I would apologise in advance if I'm missing something. Thanks

G8GKQ
Site Admin
Posts: 1257
Joined: Sun Mar 22, 2009 1:21 pm

Re: Filter Modulator Board

Post by G8GKQ » Sat Jan 12, 2019 2:30 pm

Hi Robert

No need to disconnect the filter-modulator board or the ADF4351 (although no reason not to).

You just need to select "Output to" Lime Mini on the touchscreen, connect the LimeSDR through a USB hub, upgrade the LimeSDR to the latest firmware (as described here https://wiki.batc.org.uk/Using_LimeSDR_ ... ation_Menu) and press transmit.

Dave, G8GKQ

gi3vaf
Posts: 11
Joined: Thu Apr 05, 2018 6:01 pm

Re: Filter Modulator Board

Post by gi3vaf » Sat Jan 12, 2019 3:20 pm

Hi Dave, I get it now, Many thanks. 73 Robert

Post Reply

Return to “LimeSDR Mini”