Page 4 of 4

Re: 3D printed case for LimeSDR Mini

Posted: Wed Jul 03, 2019 7:16 am
by G4NRT
radiogareth wrote:
Wed Jan 09, 2019 10:09 am
Happy to assist (print) on a 'machine time + BATC donation + post' basis.
£6 + £1 +£1.
You might like to tip the original designer via the thingyverse link although they have yet to set up a donation route.

Message me for info and colour choices.

Gareth
Hi Gareth, I have not been a member long enough to send you a PM. Perhaps you could PM me or email me at david (at) g4nrt (dot) com

Thanks David G4NRT

Re: 3D printed case for LimeSDR Mini

Posted: Wed Jun 30, 2021 3:37 am
by M0SJW
I would be interested in one please. Are you still offering these?

73,

Sam
M0SJW
DL4FBN wrote:
Thu Feb 28, 2019 7:53 am
For those who are interested, I have an offer for the housing of the LimeSDR Mini in milled ALMg3 at a price of Euro 26,00 plus shipping. The aluminium enclosure will improve physically the USB connector joint. I did check the AL printing which showed up at Euro 170 per pcs. There will be no reduction on higher quantities if we follow up the printing way.

If somebody is interested in the aluminium enclosure let me know.

73 de Reinhard

Re: 3D printed case for LimeSDR Mini

Posted: Wed Jun 30, 2021 11:37 am
by M0SKM
There were a few left when I bought one 3/4 weeks back. They are excellent quality and come with thermal contact patches. My LimeSDR Mini has run for hours without a fan and no problems.

Steve

Re: 3D printed case for LimeSDR Mini

Posted: Thu Jul 01, 2021 9:21 am
by DL4FBN
I think there are 3 more left. The three are still available but this will be the end.
The machine shop has doubled the price which is driving the price over Euro 50,00 plus shipping. For me no point to continue this housing.

73, de DL4FBN
Reinhard

Re: 3D printed case for LimeSDR Mini

Posted: Thu Jul 01, 2021 10:01 am
by g8gtz
Hi Reinhard

I'll take one please - I'll send you a PM.

Noel

Re: 3D printed case for LimeSDR Mini

Posted: Thu Jul 01, 2021 10:05 am
by g0uhy
Hi Reinhard,

I'm interested in a case too. Will PM you.

Regards

Malcolm G0UHY

Re: 3D printed case for LimeSDR Mini

Posted: Tue Jul 06, 2021 12:51 pm
by M0SJW
Reinhard,

I have sent you a PM.

Many thanks + 73

Sam M0SJW
DL4FBN wrote:
Thu Jul 01, 2021 9:21 am
I think there are 3 more left. The three are still available but this will be the end.
The machine shop has doubled the price which is driving the price over Euro 50,00 plus shipping. For me no point to continue this housing.

73, de DL4FBN
Reinhard