3D printed case for LimeSDR Mini

The place to discuss the use of the LimeSDR Mini for amateur TV applications
G4NRT
Posts: 75
Joined: Thu May 09, 2019 2:59 pm

Re: 3D printed case for LimeSDR Mini

Post by G4NRT » Wed Jul 03, 2019 7:16 am

radiogareth wrote:
Wed Jan 09, 2019 10:09 am
Happy to assist (print) on a 'machine time + BATC donation + post' basis.
£6 + £1 +£1.
You might like to tip the original designer via the thingyverse link although they have yet to set up a donation route.

Message me for info and colour choices.

Gareth
Hi Gareth, I have not been a member long enough to send you a PM. Perhaps you could PM me or email me at david (at) g4nrt (dot) com

Thanks David G4NRT

M0SJW
Posts: 2
Joined: Wed Jun 30, 2021 1:51 am

Re: 3D printed case for LimeSDR Mini

Post by M0SJW » Wed Jun 30, 2021 3:37 am

I would be interested in one please. Are you still offering these?

73,

Sam
M0SJW
DL4FBN wrote:
Thu Feb 28, 2019 7:53 am
For those who are interested, I have an offer for the housing of the LimeSDR Mini in milled ALMg3 at a price of Euro 26,00 plus shipping. The aluminium enclosure will improve physically the USB connector joint. I did check the AL printing which showed up at Euro 170 per pcs. There will be no reduction on higher quantities if we follow up the printing way.

If somebody is interested in the aluminium enclosure let me know.

73 de Reinhard

M0SKM
Posts: 369
Joined: Sun Jul 13, 2014 3:15 pm

Re: 3D printed case for LimeSDR Mini

Post by M0SKM » Wed Jun 30, 2021 11:37 am

There were a few left when I bought one 3/4 weeks back. They are excellent quality and come with thermal contact patches. My LimeSDR Mini has run for hours without a fan and no problems.

Steve
Find me on D Star through GB7BP

DL4FBN
Posts: 18
Joined: Sun Nov 18, 2018 6:27 pm

Re: 3D printed case for LimeSDR Mini

Post by DL4FBN » Thu Jul 01, 2021 9:21 am

I think there are 3 more left. The three are still available but this will be the end.
The machine shop has doubled the price which is driving the price over Euro 50,00 plus shipping. For me no point to continue this housing.

73, de DL4FBN
Reinhard

g8gtz
Posts: 1733
Joined: Wed Apr 07, 2010 6:26 pm

Re: 3D printed case for LimeSDR Mini

Post by g8gtz » Thu Jul 01, 2021 10:01 am

Hi Reinhard

I'll take one please - I'll send you a PM.

Noel

g0uhy
Posts: 81
Joined: Fri Aug 05, 2011 3:09 pm

Re: 3D printed case for LimeSDR Mini

Post by g0uhy » Thu Jul 01, 2021 10:05 am

Hi Reinhard,

I'm interested in a case too. Will PM you.

Regards

Malcolm G0UHY

M0SJW
Posts: 2
Joined: Wed Jun 30, 2021 1:51 am

Re: 3D printed case for LimeSDR Mini

Post by M0SJW » Tue Jul 06, 2021 12:51 pm

Reinhard,

I have sent you a PM.

Many thanks + 73

Sam M0SJW
DL4FBN wrote:
Thu Jul 01, 2021 9:21 am
I think there are 3 more left. The three are still available but this will be the end.
The machine shop has doubled the price which is driving the price over Euro 50,00 plus shipping. For me no point to continue this housing.

73, de DL4FBN
Reinhard

Post Reply

Return to “LimeSDR Mini”