BATC Forum

HI
While checking for the Pico Tuner parts list , I noticed a PICO TUNER REV 3 board layout. Any idea when these will be available in BATC SHOP.

regards Robert GI6IVJ

There were some in stock last week.

Mike

Due to the minor updates of the rev 1 to 3. old stock will be used before new stock will be shipped out.

There are no old stock in the UK but still a few rev1 boards left in EU.

Benno

As a newcomer to DATV I am confused.

I ordered a "PicoTuner version 3 blank PCB" on Monday (not arrived yet) and the photo alongside that heading on the BATC Shop shows Rev1 with no mention of a Rev3?

I have also used a BOM file to order all the parts from DigiKey (they have arrived), I now see that the BOM says it is for "Rev 3"?

Have I ordered the wrong list of parts for a board I haven't yet received?

Mark

All rev 1 boards gone. Only Rev3 boards are in stock both in UK and in EU warehouses.
Despite the very minor differences are there no problems anymore..

Benno

Bonjour
I am soldering the components according to your list, quick question which model should I use as a socket to fix the FUSE AUTOMOTIVE 2A 32VDC BLADE the model is not in your list
thanks in advance
Hubert

G1INU wrote: ↑

Thu Jun 06, 2024 7:50 pm

As a newcomer to DATV I am confused.

I ordered a "PicoTuner version 3 blank PCB" on Monday (not arrived yet) and the photo alongside that heading on the BATC Shop shows Rev1 with no mention of a Rev3?

I have also used a BOM file to order all the parts from DigiKey (they have arrived), I now see that the BOM says it is for "Rev 3"?

Have I ordered the wrong list of parts for a board I haven't yet received?

Mark

Not much difference. Some layout changes and addition of a power LED. Part numbers have changed but not values so should be obvious if you have the Rev1 BOM parts and a REV3 PCB. I asked for 10 Rev1 PCBs to test but rather more were ordered. They have all gone now so stick with REV3.

F5LCT wrote: ↑

Sun Jun 16, 2024 9:07 am

Bonjour
I am soldering the components according to your list, quick question which model should I use as a socket to fix the FUSE AUTOMOTIVE 2A 32VDC BLADE the model is not in your list
thanks in advance
Hubert

It is a Multicomp MCCQ-122 but digikey don't do it so it is not in the Digikey BOM. It was in the Farnell BOM but that has been dropped as many of the other parts are not or are but US stock so expensive to order. However a quick google search should find a source. They are readily available on Ebay and Amazon.

The alternative, BK-6013-ND might work. I have not tried it.

This raises a point. Parts regularly appear and disappear from suppliers. Producing a project is a nightmare with parts availability. We expect builders to notice when things are no longer available and ideally propose updates to the BOM. It is a club and not a business so relies on user input.

Mike

Hello Mike
Thank you for your response with the name of the part, it’s simpler for me.I looked at Farnel and they have the part MULTICOMP PRO MCCQ-122, according to their website they have 160,518 in stock. and -1 my order hihi.
regards and thank's for your help
73
Hubert
F5LCT

Hi,

Yes Digikey do them, they have over 233,000 of them in stock.

https://www.digikey.co.uk/en/products/d ... IBEQBdAXyA

36-3544-2-ND

Brian