Pico Tuner REV 3 board ?

User guides, discussions and problem reports for the new BATC Website
Post Reply
bobbyni+
Posts: 2
Joined: Sun Feb 03, 2019 12:38 pm

Pico Tuner REV 3 board ?

Post by bobbyni+ » Thu May 02, 2024 11:06 am

HI
While checking for the Pico Tuner parts list , I noticed a PICO TUNER REV 3 board layout. Any idea when these will be available in BATC SHOP.

regards Robert GI6IVJ

g0mjw
Posts: 2366
Joined: Sat Sep 20, 2014 9:15 am

Re: Pico Tuner REV 3 board ?

Post by g0mjw » Thu May 02, 2024 11:21 am

There were some in stock last week.

Mike

Pa3fbx
Posts: 198
Joined: Fri Oct 16, 2020 1:08 pm

Re: Pico Tuner REV 3 board ?

Post by Pa3fbx » Sat May 11, 2024 8:44 am

Due to the minor updates of the rev 1 to 3. old stock will be used before new stock will be shipped out.

There are no old stock in the UK but still a few rev1 boards left in EU.

Benno

G1INU
Posts: 22
Joined: Thu May 30, 2024 1:03 pm

Re: Pico Tuner REV 3 board ?

Post by G1INU » Thu Jun 06, 2024 7:50 pm

As a newcomer to DATV I am confused.

I ordered a "PicoTuner version 3 blank PCB" on Monday (not arrived yet) and the photo alongside that heading on the BATC Shop shows Rev1 with no mention of a Rev3?

I have also used a BOM file to order all the parts from DigiKey (they have arrived), I now see that the BOM says it is for "Rev 3"?

Have I ordered the wrong list of parts for a board I haven't yet received?

Mark
Regards
Mark - G1INU

Pa3fbx
Posts: 198
Joined: Fri Oct 16, 2020 1:08 pm

Re: Pico Tuner REV 3 board ?

Post by Pa3fbx » Mon Jun 10, 2024 10:11 am

All rev 1 boards gone. Only Rev3 boards are in stock both in UK and in EU warehouses.
Despite the very minor differences are there no problems anymore..

Benno

Post Reply

Return to “New BATC WebSite and Online Shop”