MiniTiounerPro V2
MiniTiounerPro V2
Hello,
In 2 weeks the MiniTiounerPro V2 will be available.
Many features can be found on this receiver:
- ready for receiving 2 stations at same time (useful for Duplex on Oscar-100) using next Software Dualtioune.
- 2 x RT5047 that produce 13v or 18v (400mA protected) for your LNA or LNB, one separate voltage for each different F-plug
- the MinitiounerPro has a design that allows the lowest I2C noise , Minitioune refresh rate can be 100ms (180 ms with a very slow processor like the Atom processor in my Pluto or Chuwi Tablet)
- 2 leds indicating TS1 and TS2
- 2 leds indicating LNB A/B voltage
- allows the use of LCD or Oled display
- TS1 and TS2 parallel output => we can use for developing IP interface or direct transmission to a modulator or ...
- 4 GPIO input/output
- 8 output ( with 8 leds) to drive relays, preamplifier ... depending the RF band you are using
...
The MiniTiounerPro V2 is ready for all future developments. - accept Vertical or Horizontal NIM (Price : 99.5 euros)
Jean-Pierre F6DZP
In 2 weeks the MiniTiounerPro V2 will be available.
Many features can be found on this receiver:
- ready for receiving 2 stations at same time (useful for Duplex on Oscar-100) using next Software Dualtioune.
- 2 x RT5047 that produce 13v or 18v (400mA protected) for your LNA or LNB, one separate voltage for each different F-plug
- the MinitiounerPro has a design that allows the lowest I2C noise , Minitioune refresh rate can be 100ms (180 ms with a very slow processor like the Atom processor in my Pluto or Chuwi Tablet)
- 2 leds indicating TS1 and TS2
- 2 leds indicating LNB A/B voltage
- allows the use of LCD or Oled display
- TS1 and TS2 parallel output => we can use for developing IP interface or direct transmission to a modulator or ...
- 4 GPIO input/output
- 8 output ( with 8 leds) to drive relays, preamplifier ... depending the RF band you are using
...
The MiniTiounerPro V2 is ready for all future developments. - accept Vertical or Horizontal NIM (Price : 99.5 euros)
Jean-Pierre F6DZP
Re: MiniTiounerPro V2
Looks amazing, what parts come with the kit and what else is needed?
Re: MiniTiounerPro V2
Very nice - where can we get our collective hands on one?F6DZP wrote: ↑Thu Apr 25, 2019 9:40 amHello,
In 2 weeks the MiniTiounerPro V2 will be available.
Many features can be found on this receiver:
- ready for receiving 2 stations at same time (useful for Duplex on Oscar-100) using next Software Dualtioune.
- 2 x RT5047 that produce 13v or 18v (400mA protected) for your LNA or LNB, one separate voltage for each different F-plug
- the MinitiounerPro has a design that allows the lowest I2C noise , Minitioune refresh rate can be 100ms (180 ms with a very slow processor like the Atom processor in my Pluto or Chuwi Tablet)
- 2 leds indicating TS1 and TS2
- 2 leds indicating LNB A/B voltage
- allows the use of LCD or Oled display
- TS1 and TS2 parallel output => we can use for developing IP interface or direct transmission to a modulator or ...
- 4 GPIO input/output
- 8 output ( with 8 leds) to drive relays, preamplifier ... depending the RF band you are using
...
The MiniTiounerPro V2 is ready for all future developments.
MiniTiounerPro V2 full synoptic_.jpg
- accept Vertical or Horizontal NIM
MiniTiounerProV2_NIM_.jpg
Boitier bleu avec MiniTiounerPro et LCD vue avant_.jpg
(Price : 99.5 euros)
Jean-Pierre F6DZP
Mike
Re: MiniTiounerPro V2
Mike.
I've sent an email to order one but heard nothing in reply. Perhaps that's because they're waiting for stock until they reply?
73 Dave.
I've sent an email to order one but heard nothing in reply. Perhaps that's because they're waiting for stock until they reply?
73 Dave.
...are you sure I can't use a pair of 813's?...
Re: MiniTiounerPro V2
Hi Mike,
they are taking pre orders...I ordered mine 2 weeks ago.
email fournitures@r-e-f.org, they are not overly quick to respond
and no problem with English!
Unfortunately delivery is due when I'm on holiday!!
73
Dave
G7MEG
they are taking pre orders...I ordered mine 2 weeks ago.
email fournitures@r-e-f.org, they are not overly quick to respond
and no problem with English!
Unfortunately delivery is due when I'm on holiday!!
73
Dave
G7MEG
Re: MiniTiounerPro V2
How does it connect to a Raspberry Pi?
G8DGR
G8DGR
Re: MiniTiounerPro V2
What else is needed, I cannot find a list of what this comes with.cashy666 wrote: ↑Fri Apr 26, 2019 11:53 pmHi Mike,
they are taking pre orders...I ordered mine 2 weeks ago.
email fournitures@r-e-f.org, they are not overly quick to respond
and no problem with English!
Unfortunately delivery is due when I'm on holiday!!
73
Dave
G7MEG
Re: MiniTiounerPro V2
G8GDR
It doesn't connect to a Pi, it connects to a PC or tablet to receive DATV signals just as the normal Minitiouner.
2W0ODS
That hasn't been posted anywhere. As far as can be seen you get the finished pcb and a NIM, I understand the v1 pcb came with usb leads but I may be wrong. You'll have to wait and see just like the rest of us.
73 Dave
It doesn't connect to a Pi, it connects to a PC or tablet to receive DATV signals just as the normal Minitiouner.
2W0ODS
That hasn't been posted anywhere. As far as can be seen you get the finished pcb and a NIM, I understand the v1 pcb came with usb leads but I may be wrong. You'll have to wait and see just like the rest of us.
73 Dave
...are you sure I can't use a pair of 813's?...
Re: MiniTiounerPro V2
Pity.. They would have sold a whole lot more..