MiniTiounerPro V2

Discussion about the MiniTiouner board and the MiniTiouner Digital ATV Receive Software. See also http://www.vivadatv.org/index.php
Post Reply
F6DZP
Posts: 203
Joined: Fri May 27, 2011 9:59 am

MiniTiounerPro V2

Post by F6DZP » Thu Apr 25, 2019 9:40 am

Hello,

In 2 weeks the MiniTiounerPro V2 will be available.

Many features can be found on this receiver:
- ready for receiving 2 stations at same time (useful for Duplex on Oscar-100) using next Software Dualtioune.
- 2 x RT5047 that produce 13v or 18v (400mA protected) for your LNA or LNB, one separate voltage for each different F-plug
- the MinitiounerPro has a design that allows the lowest I2C noise , Minitioune refresh rate can be 100ms (180 ms with a very slow processor like the Atom processor in my Pluto or Chuwi Tablet)
- 2 leds indicating TS1 and TS2
- 2 leds indicating LNB A/B voltage
- allows the use of LCD or Oled display
- TS1 and TS2 parallel output => we can use for developing IP interface or direct transmission to a modulator or ...
- 4 GPIO input/output
- 8 output ( with 8 leds) to drive relays, preamplifier ... depending the RF band you are using
...
The MiniTiounerPro V2 is ready for all future developments.
MiniTiounerPro V2 full synoptic_.jpg
MiniTiounerPro V2 full synoptic_.jpg (193.92 KiB) Viewed 1020 times
- accept Vertical or Horizontal NIM
MiniTiounerProV2_NIM_.jpg
MiniTiounerProV2_NIM_.jpg (159.04 KiB) Viewed 1020 times
Boitier bleu avec MiniTiounerPro et LCD vue avant_.jpg
Boitier bleu avec MiniTiounerPro et LCD vue avant_.jpg (78.81 KiB) Viewed 1020 times
(Price : 99.5 euros)

Jean-Pierre F6DZP

2W0ODS
Posts: 51
Joined: Sun Oct 21, 2018 5:15 pm

Re: MiniTiounerPro V2

Post by 2W0ODS » Fri Apr 26, 2019 5:49 am

Looks amazing, what parts come with the kit and what else is needed?

g0mjw
Posts: 887
Joined: Sat Sep 20, 2014 9:15 am

Re: MiniTiounerPro V2

Post by g0mjw » Fri Apr 26, 2019 7:01 am

F6DZP wrote:
Thu Apr 25, 2019 9:40 am
Hello,

In 2 weeks the MiniTiounerPro V2 will be available.

Many features can be found on this receiver:
- ready for receiving 2 stations at same time (useful for Duplex on Oscar-100) using next Software Dualtioune.
- 2 x RT5047 that produce 13v or 18v (400mA protected) for your LNA or LNB, one separate voltage for each different F-plug
- the MinitiounerPro has a design that allows the lowest I2C noise , Minitioune refresh rate can be 100ms (180 ms with a very slow processor like the Atom processor in my Pluto or Chuwi Tablet)
- 2 leds indicating TS1 and TS2
- 2 leds indicating LNB A/B voltage
- allows the use of LCD or Oled display
- TS1 and TS2 parallel output => we can use for developing IP interface or direct transmission to a modulator or ...
- 4 GPIO input/output
- 8 output ( with 8 leds) to drive relays, preamplifier ... depending the RF band you are using
...
The MiniTiounerPro V2 is ready for all future developments.
MiniTiounerPro V2 full synoptic_.jpg

- accept Vertical or Horizontal NIM
MiniTiounerProV2_NIM_.jpg

Boitier bleu avec MiniTiounerPro et LCD vue avant_.jpg

(Price : 99.5 euros)

Jean-Pierre F6DZP
Very nice - where can we get our collective hands on one?

Mike

User avatar
M5TXJ
Posts: 185
Joined: Wed Jul 05, 2017 8:34 pm

Re: MiniTiounerPro V2

Post by M5TXJ » Fri Apr 26, 2019 11:29 am

Mike.

I've sent an email to order one but heard nothing in reply. Perhaps that's because they're waiting for stock until they reply?

73 Dave.

cashy666
Posts: 40
Joined: Mon Aug 10, 2015 9:53 pm

Re: MiniTiounerPro V2

Post by cashy666 » Fri Apr 26, 2019 11:53 pm

Hi Mike,
they are taking pre orders...I ordered mine 2 weeks ago.
email fournitures@r-e-f.org, they are not overly quick to respond
and no problem with English!
Unfortunately delivery is due when I'm on holiday!! :cry:

73
Dave
G7MEG

G8DGR
Posts: 16
Joined: Tue Oct 01, 2013 3:06 pm

Re: MiniTiounerPro V2

Post by G8DGR » Sat Apr 27, 2019 8:34 am

How does it connect to a Raspberry Pi?
G8DGR

2W0ODS
Posts: 51
Joined: Sun Oct 21, 2018 5:15 pm

Re: MiniTiounerPro V2

Post by 2W0ODS » Sat Apr 27, 2019 9:25 am

cashy666 wrote:
Fri Apr 26, 2019 11:53 pm
Hi Mike,
they are taking pre orders...I ordered mine 2 weeks ago.
email fournitures@r-e-f.org, they are not overly quick to respond
and no problem with English!
Unfortunately delivery is due when I'm on holiday!! :cry:

73
Dave
G7MEG
What else is needed, I cannot find a list of what this comes with.

User avatar
M5TXJ
Posts: 185
Joined: Wed Jul 05, 2017 8:34 pm

Re: MiniTiounerPro V2

Post by M5TXJ » Sat Apr 27, 2019 9:59 am

G8GDR

It doesn't connect to a Pi, it connects to a PC or tablet to receive DATV signals just as the normal Minitiouner.

2W0ODS

That hasn't been posted anywhere. As far as can be seen you get the finished pcb and a NIM, I understand the v1 pcb came with usb leads but I may be wrong. You'll have to wait and see just like the rest of us.

73 Dave

G8DGR
Posts: 16
Joined: Tue Oct 01, 2013 3:06 pm

Re: MiniTiounerPro V2

Post by G8DGR » Sat Apr 27, 2019 5:17 pm

Pity.. They would have sold a whole lot more..

Post Reply

Return to “The MiniTiouner and MiniTioune Digital Receive Software”