Looking for good source MCP1826S-3302E/AB

Discussion about the MiniTiouner board and the MiniTiouner Digital ATV Receive Software. See also http://www.vivadatv.org/index.php
Post Reply
PH2M
Posts: 9
Joined: Thu Mar 07, 2019 10:56 am

Looking for good source MCP1826S-3302E/AB

Post by PH2M » Sat Mar 30, 2019 2:01 pm

I ordered 2 pcs MCP1826S-3302E/AB from https://www.ebay.nl/itm/IC-LDO-3-3V-1A- ... 3358968373, but until now (almost 4 weeks) nothing received from the UK :evil:
Does anybody have a reliable source including low shipment costs within EU for 2 pcs MCP1826S-3302E/AB ? (Digikey, Farnell, Mouser etc. asking about € 20 shipment for orders up to € 50 !!!)
This are the last 2 parts I need to finish my BATC Minitiouner V2 :roll:

Thanks for your reply! 73 de Frank PH2M 8-)

M0SKM
Posts: 253
Joined: Sun Jul 13, 2014 3:15 pm

Re: Looking for good source MCP1826S-3302E/AB

Post by M0SKM » Sat Mar 30, 2019 10:19 pm

Frank,
RS are usually very quick.

https://uk.rs-online.com/web/p/low-drop ... s/6695174/

The eBay seller you linked to is one I buy from regularly; they are normally very good. Have you told them the parts haven't arrived? They were quick to help me when a part went missing.

73 Steve

PH2M
Posts: 9
Joined: Thu Mar 07, 2019 10:56 am

Re: Looking for good source MCP1826S-3302E/AB

Post by PH2M » Sun Mar 31, 2019 9:41 am

Hi Steve, yes we have had contact, he told me he posted my order (from the 6th of March) on the 11th, tomorrow that will be 3 weeks for shipment, I never experienced a shipment from the UK to The Netherlands taking more then 6~10 days :o , so I think something went terrible wrong, he suggested to wait until the end date as shown during ordering (up to May 2nd !!! :shock: ) I want to finish my BATC Minitiouner V2 and need these 2 regulators as my final parts... :(
So I told him that if nothing arrived this Tuesday (April 2nd) I will cancel the order, claim my PayPal payment and order somewhere else...

73 de Frank PH2M 8-)

PH2M
Posts: 9
Joined: Thu Mar 07, 2019 10:56 am

Re: Looking for good source MCP1826S-3302E/AB

Post by PH2M » Sun Mar 31, 2019 9:51 am

M0SKM wrote:
Sat Mar 30, 2019 10:19 pm
Frank,
RS are usually very quick.

https://uk.rs-online.com/web/p/low-drop ... s/6695174/

The eBay seller you linked to is one I buy from regularly; they are normally very good. Have you told them the parts haven't arrived? They were quick to help me when a part went missing.

73 Steve
I check 'local' nl.rs-online, I have to buy 5 regulators minimum, but shipment is € 4,95 (excl.VAT), so better then € 20 or so, but I also found another company which is part of Farnell and has an adres in NL where I can buy from 1 piece, I probably will try that later this week!

Any other suggestions are still welcome!

73 de Frank PH2M

g4eml
Posts: 34
Joined: Thu Apr 26, 2018 9:36 am

Re: Looking for good source MCP1826S-3302E/AB

Post by g4eml » Sun Mar 31, 2019 11:03 am

R.S in the UK has free delivery and no minimum order amount for orders placed online. You can even order a single low cost item and it will arrive next day by Parcelforce courier. It is not obvious from the website that this is the case. Unfortunately I think it is restricted to U.K. orders only, but there might be a similar offer in your country.

User avatar
ON4AAH
Posts: 8
Joined: Sun Feb 14, 2010 2:33 pm

Re: Looking for good source MCP1826S-3302E/AB

Post by ON4AAH » Wed Apr 03, 2019 9:05 am

I also ordered this from the same seller, normally 5 days en route to receive the shipment, but after 2 weeks received nothing, maybe it comes from China. :oops: :oops: :oops: :oops:
Last edited by ON4AAH on Wed Apr 24, 2019 8:51 am, edited 2 times in total.

PH2M
Posts: 9
Joined: Thu Mar 07, 2019 10:56 am

Re: Looking for good source MCP1826S-3302E/AB

Post by PH2M » Sat Apr 06, 2019 4:42 pm

I finished my BATC Minitiouner V2 after receiving finally my ordered MCP1826S-3302E/AB :D , nothing received or money back yet from the UK eBay shop mentioned in my first message :evil:
This week I ordered my final missing parts here in The Netherlands https://sinuss.nl/componenten/halfgelei ... 3microchip

Thanks for any replies, hope to receive/see many of the other members via DATV 8-)

73 de Frank PH2M - JO22HC

User avatar
ON4AAH
Posts: 8
Joined: Sun Feb 14, 2010 2:33 pm

Re: Looking for good source MCP1826S-3302E/AB

Post by ON4AAH » Sun Apr 21, 2019 3:50 pm

I am still waiting for my order on March 23 2019 from the same seller on E-bay. Not responding to my e-mail. :evil: :evil: :evil:......After 30 days money back via paypal, have not received anything like the other buyers. :evil: :evil:
Last edited by ON4AAH on Wed Apr 24, 2019 8:52 am, edited 1 time in total.

F1NST-Bernard
Posts: 32
Joined: Mon Mar 27, 2017 9:45 pm

Re: Looking for good source MCP1826S-3302E/AB

Post by F1NST-Bernard » Mon Apr 22, 2019 4:24 pm

Found message on Forum DATV which could help.

de ON1RC » Mer 17 Avr 2019 12:07

Bonjour,
Pour information j'ai remplacé les 2 x MCP1826S-3302EAB (regulateur 3,3 v ) pour cause de non disponibilité rapide par 2 X TS 2940 CZ33 :: Régulateur de tension LDO +3,3 V 1 A TO220 disponible ---->https://www.reichelt.de/ldo-regler-fest ... 4.html?r=1 . Fonctionnement Minitiouner ok ;)
Tout les autres composants electronique sont également disponible chez Reichelt (... site pas facile pour la recherche)

73's de ON1RC
Chris
ON1RC

In fact , our friend used a other Ic as replacement with similar caracteristics. Hope this help. Need translation ?? ;-)

PH2M
Posts: 9
Joined: Thu Mar 07, 2019 10:56 am

Re: Looking for good source MCP1826S-3302E/AB

Post by PH2M » Mon Apr 22, 2019 7:52 pm

Merci Bernard,

I was able to order 2x MCP1826S-3302E/AB from a Dutch store a few weeks ago!
But thanks for the information, maybe others can use this information and use the TS 2940 CZ33 as a replacement!

73 de Frank PH2M

Post Reply

Return to “The MiniTiouner and MiniTioune Digital Receive Software”