at last I am almost ready to receive Es'hail-2 with my MiniTiouner V1.0 - Sharp NIM.
I noticed that LNBA (Sharp tuner pin 2) goes to J4 pin 1 and I guess that I can give to this pin 12 or 18Volts according to the polarization I want: am I correct?
for the Es'hail-2 DATV feed, which is Horizontal, it will be 18V.
I wonder if it is worth to insert in the line (in serie with D1) a fuse or a PTC similar to FS1 (MC36187).
73
de
i2NDT Claudio
powering a LNB through a MiniTiouner V1.0
powering a LNB through a MiniTiouner V1.0
i2NDT Claudio
Dalmine, Italia
Dalmine, Italia
Re: powering a LNB through a MiniTiouner V1.0
Yes Claudio
That's the right pin for 18v. A fuse or polyfuse is almost essential here. It is very easy to blow up the internal RF choke.
Dave
That's the right pin for 18v. A fuse or polyfuse is almost essential here. It is very easy to blow up the internal RF choke.
Dave
Re: powering a LNB through a MiniTiouner V1.0
thanks Dave!
but now I have a big problem...
I think I have "fried" somehow my Sharp tuner as Minitioune does not see it and when I measure the voltage at TP1v I have 1.45 V istead of 1...
if I remove the tuner I measure 1.00 V ...
Claudio
but now I have a big problem...
I think I have "fried" somehow my Sharp tuner as Minitioune does not see it and when I measure the voltage at TP1v I have 1.45 V istead of 1...
if I remove the tuner I measure 1.00 V ...
Claudio
i2NDT Claudio
Dalmine, Italia
Dalmine, Italia