downloading software

Discussion about the MiniTiouner board and the MiniTiouner Digital ATV Receive Software. See also http://www.vivadatv.org/index.php
Post Reply
G8KUZ
Posts: 6
Joined: Sat May 09, 2009 7:15 pm

downloading software

Post by G8KUZ » Wed Oct 24, 2018 8:43 pm

Hi
I registered on VivaDATV site a while back.
Today i finished building the Mini Tioune2 .
I went onto the site today to download the Mini Tioune software, but it would not let me login.
I asked for a new password to be sent to my email address (several times) but i have not received any reply.
Can you help?

Regards
John Wiggins G8KUZ
wigjohn@gmail.com

User avatar
G0NMY
Posts: 99
Joined: Wed Nov 11, 2009 6:10 pm

Re: downloading software

Post by G0NMY » Wed Oct 24, 2018 9:26 pm

http://www.vivadatv.org/viewtopic.php?f=60&t=521

If you can't log in John I have a copy of the zip file in my dropbox.
Cheers Mark G0NMY
   

   

http://www.g0nmy.blogspot.co.uk/

¡ʎɐqƎ ɟɟo pɹɐoqʎǝʞ ɐ ʎnq I ǝɯᴉʇ ʇsɐl ǝɥʇ sᴉ sᴉɥʇ

G8KUZ
Posts: 6
Joined: Sat May 09, 2009 7:15 pm

Re: downloading software

Post by G8KUZ » Thu Oct 25, 2018 2:44 pm

Hi Mark
Long time no hear.
Been moving my shack down from the loft into what was my son's bedroom. He only comes to visit 2 or 3 times a year so he has a bed in
the corner and the rest of the room is now full of my stuff.
Until I sort out this software problem i've borrowed a sat receiver from Albert G4DHO , but in the move to the new shack I
could not find the remote to set it up. Anyway i've just had a visit from albert and now i'm up and running on GB3UD in rx mode.
I now need to to sort out my Comtech modules and amp so that i can put a picture in.......don't hold your breath!
(i'm also collecting the bits to build the Portsdown Tx).
In the mean time how do i access your dropbox to have a go at downloading the software?

Thanks for the reply
Best regards
John

User avatar
G0NMY
Posts: 99
Joined: Wed Nov 11, 2009 6:10 pm

Re: downloading software

Post by G0NMY » Thu Oct 25, 2018 3:09 pm

Sent you a PM John with the link, as I dont think its allowed to post unofficial links to the software on here. :D

Cheers Buddy nice to see you're still about hee hee
73 Mark
   

   

http://www.g0nmy.blogspot.co.uk/

¡ʎɐqƎ ɟɟo pɹɐoqʎǝʞ ɐ ʎnq I ǝɯᴉʇ ʇsɐl ǝɥʇ sᴉ sᴉɥʇ

Kevin_G7UXW
Posts: 4
Joined: Wed Dec 05, 2018 8:42 pm

Re: downloading software

Post by Kevin_G7UXW » Tue Dec 11, 2018 4:53 pm

Is the Viva DATV sight working ???
where do you get the Minitioune V0.8s software from. I have registerd on the Viva DATV site and no password sent back. I have requested a new password more times than i can poke a stick at it------- no reply

what do I do ???
Kevin G7UXW

User avatar
G0NMY
Posts: 99
Joined: Wed Nov 11, 2009 6:10 pm

Re: downloading software

Post by G0NMY » Wed Dec 12, 2018 12:18 am

http://www.vivadatv.org/viewtopic.php?f=60&t=521

Version 0.8 is latest.


Minitioune V0.8s for all MiniTiouners or MiniTiouners-PRO

Postby F6DZP » Fri 20 Apr 2018 12:38
Hello,

Minitioune V0.8s is ready for download. // Minitioune v0.8 est disponible pour le téléchargement.


Minitioune v0.8s can work with all kind of MiniTiouners // Minitioune V0.8s peut fonctionner avec tout type de MiniTiouners

- MiniTiouner V1 (homemade, kit F1CHF, kit BATC ...) with NIM Eardatek EDS-4B47FF1B+

- MiniTiouner V1(homemade, kit F1CHF, kit BATC ...) with NIM SHARP BS2F7HZ0169/Samsung DNBU-10512IST / LG TDQX-S001F

- MiniTiouner V1(homemade...) with NIM Serit SP-2246T

- MiniTiouner V1 + extension (kit BATC V1+ pcb extension) with NIM Serit FTS-4335 , FTS-4334 or FTS-4339

- MiniTiouner V2 (homemade, kit BATC V2...) with NIM Serit FTS-4335 , FTS-4334 or FTS-4339

- MiniTiouner-PRO (homemade or already built by REF) with NIM Serit FTS-4335 , FTS-4334 or FTS-4339

- MiniTiouner-Express (already built by DATV-express.org/USA) with NIM Serit FTS-4334


Minitioune software must now detect which kind of MiniTiouner is used because they don’t have all the same hardware possibilities.


- If you are using a MiniTiouner V1 (Eardatek, Sharp..), change nothing

- If you are using a MiniTiouner-PRO, change nothing

- If you are using a MiniTiouner V1+extension or V2 ( BATC kit) with a NIM FTS4335 or FTS4334, you must add a resistor between the Ground and pin CN2-19.
Image

https://www.dropbox.com/s/f70aun25cjmmj ... e.zip?dl=1

Maybe BATC could arrange with Jean-Pierre to also host the software on this site?
It is a big integral part of the DATV RX system.
:) :)

Post Reply

Return to “The MiniTiouner and MiniTioune Digital Receive Software”