Problems with display video from Minitioune v0.8
Posted: Fri Oct 05, 2018 4:14 pm
Hi all,
Configuring a new laptop to run MiniTioune and have hit a few problems that I don't appear to be able to resolve.
Using a MiniTiouner v2 (Serit FTS-4334L) and that hardware all appears to check out ok. I can run the TestMyMiniTiounerV0_2a that comes with MiniTioune v0.8 and everything checks out correctly - it correctly identifies the MiniTiouner type and the I2C/NIM tests result in green lights and no errors.
I've also downloaded and installed the LAV filters and registered the urac.ax file as per F6DZP's instructions and no errors are reported.
However, when I run the CheckMiniTiouneDriverAndFilters_V0_5a.exe I get the following error
Clicking OK just terminates the program.
If I try and run MiniTioune_V0_8s.exe, I get the following message box This time, clicking OK brings up the main MiniTioune screen and if I set the parameters to match the signal I'm tx'ing everything appears to work except the video decoding as shown here
D3D9.dll is related to DirectX - I checked my setup wih the dxdiag command and it responded that everything is working as expected.
I'm running on a Dell laptop with an Intel HD Graphics 630 controller running the LCD and a second graphics card (NVIDIA Quatro P4000) to drive external display, I'm only using the LCD screen at the moment.
Any thoughts on what to double check? I've tried the standard remove, reboot, reinstall cycle but it just keeps doing the above.
TIA and 73s
Ciaran
M0XTD
Configuring a new laptop to run MiniTioune and have hit a few problems that I don't appear to be able to resolve.
Using a MiniTiouner v2 (Serit FTS-4334L) and that hardware all appears to check out ok. I can run the TestMyMiniTiounerV0_2a that comes with MiniTioune v0.8 and everything checks out correctly - it correctly identifies the MiniTiouner type and the I2C/NIM tests result in green lights and no errors.
I've also downloaded and installed the LAV filters and registered the urac.ax file as per F6DZP's instructions and no errors are reported.
However, when I run the CheckMiniTiouneDriverAndFilters_V0_5a.exe I get the following error
Clicking OK just terminates the program.
If I try and run MiniTioune_V0_8s.exe, I get the following message box This time, clicking OK brings up the main MiniTioune screen and if I set the parameters to match the signal I'm tx'ing everything appears to work except the video decoding as shown here
D3D9.dll is related to DirectX - I checked my setup wih the dxdiag command and it responded that everything is working as expected.
I'm running on a Dell laptop with an Intel HD Graphics 630 controller running the LCD and a second graphics card (NVIDIA Quatro P4000) to drive external display, I'm only using the LCD screen at the moment.
Any thoughts on what to double check? I've tried the standard remove, reboot, reinstall cycle but it just keeps doing the above.
TIA and 73s
Ciaran
M0XTD