Hope everyone had a Happy Christmas.
I now know why my brother was so interested in my projects and insisting I did not start till 2018!!
a digikey package was under the tree
Today I made the Mini Tiouner and what a well designed bit of kit with everything fitting.
The only problems I had in constructon were missing M3 nuts and bolts which are not on the BOM.
I finally managed to get some from screwfix. and also there were no jumpers on the BOM.
one is required for the PSU enable and one to put a DC Voltage on the RF input.
Having got round those problems I now find that all my phone charger USB cables that I had naievley asumed would fit are too small.
I have placed an order with Lindy so maybe tomorrow I will get it all working.
73 to all and a Happy 2018
Nick
Christmas present
Re: Christmas present
Ah - assumed everyone had jumpers and M3 hardware in their junkboxes - they don't need to be M3 just sufficient to hold down the regulators. The phone is a mini-USB. There are many USB standard connectors unfortunately and this one is now two standards back in time. When you get one, make sure its not designed just for charging.
Mike
Mike
Re: Christmas present
Hi Mike
I ordered the reccomended USB cable .
Next step is drilling out the front panel
Thats the hard part Hi Hi
Its been a fun little project to build
73
Nick
I ordered the reccomended USB cable .
Next step is drilling out the front panel
Thats the hard part Hi Hi
Its been a fun little project to build
73
Nick