OLED Display for Minitiouner V2 with FTS4334L

Discussion about the MiniTiouner board and the MiniTiouner Digital ATV Receive Software. See also http://www.vivadatv.org/index.php
G1BVI
Posts: 282
Joined: Wed Aug 02, 2017 7:32 am

Re: OLED Display for Minitiouner V2 with FTS4334L

Post by G1BVI » Sat Sep 01, 2018 1:20 pm

radiogareth wrote:
Thu Aug 16, 2018 4:28 pm
I believe they are 'generic' (Chinese copies) and if you search for these "0.96" I2C IIC Serial 128X64 White OLED LCD LED Display Module for Arduino UK" on eBay there are lots. However, as per my questions above, they work fine with my arduino but won't with my MT v0.8 so far. As to proper branded units, I doubt they actually exist....
Gareth
My 0.96 display has fnaly arived !
Will wire it up Sunday.
Priority today is to get my dish on 26 degrees East :-)
Thanks again
Nick

radiogareth
Posts: 1215
Joined: Wed Jan 06, 2016 9:46 am

Re: OLED Display for Minitiouner V2 with FTS4334L

Post by radiogareth » Sat Sep 01, 2018 1:39 pm

Don't hold your breath Nick, mine never did work on the MiniT.....I'm waiting for the same resolution but 1.3" displays to arrive from China. It must be something in the code that doesn't agree :-(
They do work nicely with a variety of arduino projects though, like this one....https://www.instructables.com/id/3D-Pri ... att-Meter/ which I built from China Nanos and current sensors.
Whats at 26 degrees East?

Gareth

G1BVI
Posts: 282
Joined: Wed Aug 02, 2017 7:32 am

Re: OLED Display for Minitiouner V2 with FTS4334L

Post by G1BVI » Sat Sep 01, 2018 3:56 pm

Yep u r right :-(
Ordered the larger display too but that has yet to get here... due next week.
73

Nick

G7ITT
Posts: 3
Joined: Mon Mar 26, 2018 9:36 am

Re: OLED Display for Minitiouner V2 with FTS4334L

Post by G7ITT » Sun Sep 02, 2018 2:06 pm

Hi all,
Is there a specific chipset for the OLED display or will any one do? I have 6 displays none of which work but they are all from the same supplier and 2 are .96".
73
Seamus

radiogareth
Posts: 1215
Joined: Wed Jan 06, 2016 9:46 am

Re: OLED Display for Minitiouner V2 with FTS4334L

Post by radiogareth » Wed Sep 05, 2018 12:24 pm

Well THIS one works, just arrived :-)
https://www.ebay.co.uk/itm/1-3-inch-Blu ... 2749.l2649

It seems that they are NOT all the same despite seeming to have the same resolution and I2C address coded.

Looks LOVELY :-)

Gareth (Happier now)

M0YDH
Posts: 264
Joined: Sat Dec 31, 2016 5:59 pm

Re: OLED Display for Minitiouner V2 with FTS4334L

Post by M0YDH » Sun Sep 30, 2018 6:49 pm

Thank you / Merci beaucoup toute le monde!

V2 Minitiouner was an easy build
20180930_193239-756x1008.jpg
20180930_193239-756x1008.jpg (184.36 KiB) Viewed 4932 times
and reading these forum notes together with 0.8 software means the screen worked straightaway.

There's just boxing it up to do - hopefully with some radiogareth printed closure plates.

73
David M0YDH

m0pnn
Posts: 22
Joined: Wed Oct 03, 2018 1:16 pm

Re: OLED Display for Minitiouner V2 with FTS4334L

Post by m0pnn » Wed Oct 03, 2018 1:40 pm

Hi

David

Just finished mine must get you to send me some pictures to test it. Made a few mistakes drilling but epoxy putty is great at filling holes.

Paul

m0pnn
20181003_124030.jpg
20181003_124030.jpg (142.41 KiB) Viewed 4853 times

Post Reply

Return to “The MiniTiouner and MiniTioune Digital Receive Software”