Case for V2 tuner ?
Case for V2 tuner ?
Just been assembling my V2 tuner and what a great piece of work it is !
Question,
I see in the wiki it's built into a nice looking case - any idea where I could get one ?
73 Tim
Question,
I see in the wiki it's built into a nice looking case - any idea where I could get one ?
73 Tim
Re: Case for V2 tuner ?
Hi,
as mentioned in the wiki:
(https://wiki.batc.tv/MiniTiouner_hardware_Version_2)
The PCB has been developed to fit snuggly inside a Hammond 1455 series 103x120x53mm enclosure and uses standard leaded components so no specialist techniques needed.
At least available at digikey and on ebay...
Cheers
Rainer
as mentioned in the wiki:
(https://wiki.batc.tv/MiniTiouner_hardware_Version_2)
The PCB has been developed to fit snuggly inside a Hammond 1455 series 103x120x53mm enclosure and uses standard leaded components so no specialist techniques needed.
At least available at digikey and on ebay...
Cheers
Rainer
Re: Case for V2 tuner ?
See https://wiki.batc.tv/File:Notes_on_buil ... iouner.pdf in the Wiki, its not that easy to find.g0mjw wrote:Google for 1455N1201
Re: Case for V2 tuner ?
doh !
Should have guessed it would be documented somewhere, thanks for the pointer !
73 Tim
Should have guessed it would be documented somewhere, thanks for the pointer !
73 Tim
Re: Case for V2 tuner ?
Hi Guys and Gals
Just wondered if anyone had produced a drilling template for the Hammonf front panel.
73
Nick
G1BVI
Just wondered if anyone had produced a drilling template for the Hammonf front panel.
73
Nick
G1BVI
Re: Case for V2 tuner ?
Its in the WIKI document.
Re: Case for V2 tuner ?
Thanksg0mjw wrote:Its in the WIKI document.
I had looked but did not come accross them.
Just delved in deeper and found them under notes on building the BATC MT.
73
Nick