MiniTiouner V2.0 Contruction
Re: MiniTiouner V2.0 Contruction
Thanks Gareth, Brilliant.
Just waiting for 100n bigger lead spacing than I have in my drawer.could have used them but I ordered 50, so I'll wait a bit. Be nice to actually hear something on it (Langstone RX with Pluto is good).
Thanks again
Steve
Just waiting for 100n bigger lead spacing than I have in my drawer.could have used them but I ordered 50, so I'll wait a bit. Be nice to actually hear something on it (Langstone RX with Pluto is good).
Thanks again
Steve
Re: MiniTiouner V2.0 Contruction
Just be aware that although the USB module is ready programmed, you do need to add a 10k resistor if you are going to use the later versions of the Minitioune software. Pin 10 of CN2 to ground as below.
Clive
Clive
Re: MiniTiouner V2.0 Contruction
Thanks Clive . . . I did that this morning. Funny, I used a 10k (says 5.6k to 12k).
Watching, wating, hoping postman brings yo last capacitors today.
Thanks again.
Steve
Watching, wating, hoping postman brings yo last capacitors today.
Thanks again.
Steve
-
- Posts: 2
- Joined: Sun Apr 02, 2023 4:52 pm
Re: MiniTiouner V2.0 Contruction
Hello i have one problem with my minitiouner v2 every time I turn on the my computer, the minitiouner drivers is gone, and I have to reinstall again, what happen? my system is win 10.
Re: MiniTiouner V2.0 Contruction
Where did you get the PCB. The Shop says out of stock
-
- Posts: 1241
- Joined: Wed Jan 06, 2016 9:46 am
Re: MiniTiouner V2.0 Contruction
If you are stuck I have a blank spare I could post you, (and an FTDI module too) but its likely the shop stock will be in hand.
Gareth
Gareth
Last edited by radiogareth on Sun Mar 24, 2024 9:25 am, edited 1 time in total.
Re: MiniTiouner V2.0 Contruction
Which drivers? If you mean the USB then perhaps you have downloaded some other FTDI drivers that are conflicting? If you mean the graphics drivers perhaps they are corrupt or have a virus or something that the virus scanner thinks is a virus and are being removed or disabled.sv1coasv1coa wrote: ↑Mon Apr 03, 2023 6:29 amHello i have one problem with my minitiouner v2 every time I turn on the my computer, the minitiouner drivers is gone, and I have to reinstall again, what happen? my system is win 10.