I have noticed WIMO in Germany are stocking a DATV DVBS/S2 receiver as a ready built unit from ELAD …you need the minitoune download still .
Link here for interest
https://www.wimo.com/en/pf-rxsat?queryI ... n_products
ELAD DATV RX available at WIMO
ELAD DATV RX available at WIMO
Steve G4HTZ
ASHEN nr Sudbury JO02GB52 90m ASL
70cms DATV portsdown 4 + RYDE rx …14 or 18 ele yagi …LNA …hopefully 100w amp at some point
ASHEN nr Sudbury JO02GB52 90m ASL
70cms DATV portsdown 4 + RYDE rx …14 or 18 ele yagi …LNA …hopefully 100w amp at some point
Re: ELAD DATV RX available at WIMO
Before ordering, I know someone who bought one and wasn't very happy with it. There were issues with the LNB supply.
Mike
Mike
Re: ELAD DATV RX available at WIMO
Hi Mike,
Isn't the issue that the LNB supply is simply the supply voltage that is directly connected to the F socket therefore the RX needs an 18v supply for DATV. Also connecting to terrestrial aerials has the probability of shorting the supply.
73 Dave.
Isn't the issue that the LNB supply is simply the supply voltage that is directly connected to the F socket therefore the RX needs an 18v supply for DATV. Also connecting to terrestrial aerials has the probability of shorting the supply.
73 Dave.
...are you sure I can't use a pair of 813's?... 
Re: ELAD DATV RX available at WIMO
E-Tiouner from ELAD
Hi,
I tried to run on the same software V.0.9.9.1.h on which I have running the original minitiouner since years to run a new ELAD e-tiouner. The software on the PC comes up with the same look an feel , but the setting buttons for the power supply of the LNB´s is grey and cannot be set. Even by supplying via a Bias-T with 18V to the LNB, there is no RX-signal coming in. I have issued a claim ticket at WIMO and sent back the ELAD. Response from WIMO: no error found despite I described very detailled the behaviour.
What´s the difference to the former Minitiouner I bought in the DARC shop, which is running well ?
Is there any software patch available which makes running the ELAD ?
Please help, tnx and 73, DL9SDL, Helm
Hi,
I tried to run on the same software V.0.9.9.1.h on which I have running the original minitiouner since years to run a new ELAD e-tiouner. The software on the PC comes up with the same look an feel , but the setting buttons for the power supply of the LNB´s is grey and cannot be set. Even by supplying via a Bias-T with 18V to the LNB, there is no RX-signal coming in. I have issued a claim ticket at WIMO and sent back the ELAD. Response from WIMO: no error found despite I described very detailled the behaviour.
What´s the difference to the former Minitiouner I bought in the DARC shop, which is running well ?
Is there any software patch available which makes running the ELAD ?
Please help, tnx and 73, DL9SDL, Helm
Re: ELAD DATV RX available at WIMO
Helm,
I can confirm the ELAD RX does work on Minitioune software with no problems.
The LNB voltage is whatever the supply voltage is, there is no other way to control that. Have tested with a bias tee and that works fine on QO100, there must have been a fault on the one you had.
Tom
Have tested with open tuner 0.9 and everything works as expected, so no problem there.
I can confirm the ELAD RX does work on Minitioune software with no problems.
The LNB voltage is whatever the supply voltage is, there is no other way to control that. Have tested with a bias tee and that works fine on QO100, there must have been a fault on the one you had.
- ELAD MT.jpg (409.82 KiB) Viewed 5019 times
Tom
Have tested with open tuner 0.9 and everything works as expected, so no problem there.
- Screenshot (85).png (1012.83 KiB) Viewed 5025 times
Re: ELAD DATV RX available at WIMO
The unit appears to be to the BATC V2 design but with the DC-DC convertor and FTDI module laid out onto the main PCB.
If you don't want the power supply voltage appearing on the LNB connectors, there are individual links to disconnect these connections.
It's a nicely made unit if you don't want the hassle of making up something yourself.
Nigel G8AYC.
If you don't want the power supply voltage appearing on the LNB connectors, there are individual links to disconnect these connections.
It's a nicely made unit if you don't want the hassle of making up something yourself.
Nigel G8AYC.
Re: ELAD DATV RX available at WIMO
It now says 'No Longer Available' on the web page. Presumably they have run out of NIMs.
Colin G4EML
Colin G4EML