SR/freq needed

Discussion about the MiniTiouner board and the MiniTiouner Digital ATV Receive Software. See also
Post Reply
Posts: 4
Joined: Sun Feb 06, 2022 1:42 pm

SR/freq needed

Post by moonbouncer » Sun Oct 15, 2023 12:50 pm

Hi all,

I have a Minitiouner FTS-4334L with v0.8 software running here. It's works fine.

There are 5 preset knobs in the upper left panel for SR and frequencies.
I want to use more preset knobs, so I added knobs 6,7 and 8 in the config file. But without result ;-)
I don't get an error message, but the program simply won't show more knobs.

I see pictures on the internet from other hams who use up to 10 preset knobs. So I assume that what I want is possible.

Does anyone know what might be the problem?

73's de Ruud PA7RP

User avatar
Posts: 321
Joined: Sun Nov 20, 2011 3:44 pm

Re: SR/freq needed

Post by G3GJA » Sun Oct 15, 2023 2:26 pm


The version you are using is limited to 5 buttons on each side.

Upgrade to v0.9 or v1.01 and then you will get 8 on each side.

It is not possible to change the number of pre-sets in any version; it's hard coded.



Post Reply

Return to “The MiniTiouner and MiniTioune Digital Receive Software”