New Minitiouner batch, may be

Discussion about the MiniTiouner board and the MiniTiouner Digital ATV Receive Software. See also http://www.vivadatv.org/index.php
Post Reply
F1CJN_alain
Posts: 90
Joined: Thu Jul 21, 2011 9:50 am

New Minitiouner batch, may be

Post by F1CJN_alain » Thu Jun 16, 2022 4:16 pm

the R-E-F in france is doing a survey to check if there is enough people to share a new batch of Minitiouners.
It is here and before end of june.
https://vote.r-e-f.org/limesurvey/index ... =Y&lang=fr
73s
Alain F1CJN

g8gtz
Posts: 1732
Joined: Wed Apr 07, 2010 6:26 pm

Re: New Minitiouner batch, may be

Post by g8gtz » Thu Jun 16, 2022 4:39 pm

Hi Alain,

FYI - BATC currently have 300 Serit NIMs in stock and will continue to supply PCBs and other components to enable these to be built into units.

I don't know if REF have asked Serit about NIM supply as they announced a last time buy of the Serit 4434 NIM last December and may not be able to supply REF if they did not purchase any then.

73

Noel - G8GTZ

g4kzy
Posts: 13
Joined: Mon Feb 19, 2018 8:59 am

Re: New Minitiouner batch, may be

Post by g4kzy » Fri Jan 13, 2023 4:25 pm

Hi Noel,

I see that the MiniTiouner version 2 blank PCB is shown as out of stock in the shop at the moment.

Do you know if some more are on their way? Or does anybody have a MiniTiouner which is surplus to requirements?

73,

Paul G4KZY

Post Reply

Return to “The MiniTiouner and MiniTioune Digital Receive Software”