RT5047 BATC AddOn Board

Discussion about the MiniTiouner board and the MiniTiouner Digital ATV Receive Software. See also http://www.vivadatv.org/index.php
Post Reply
OE8JPQ
Posts: 1
Joined: Mon Sep 30, 2019 1:35 pm

RT5047 BATC AddOn Board

Post by OE8JPQ » Mon Sep 30, 2019 1:47 pm

Hi,

I've succesfully bult the RT5047 board and there is one question left:

How do i connect the other RT5047 for the second lnb? I mean +12V/GND/LNB is clear but with VSel and Enable i'm not so shure.
Do i just make a y-connection there or are there some dedicated pins for this?

73's de Phil OE8JPQ

PS: If there are only 5-6V on the output (LNB) the ground connection underneath the IC is not present/faulty . Maybe it is a good idea to add this fact to the wiki. I had the same problem on one side and it took me a while to figure that out :? :D

G5TV
Posts: 3
Joined: Mon May 04, 2020 10:34 pm

Re: RT5047 BATC AddOn Board

Post by G5TV » Wed Oct 14, 2020 12:55 pm

Hi Phil,
Did you ever get a answer to this? I am in exactly the same situation.Regards Brent G5TV

PE5PVB
Posts: 32
Joined: Sun Sep 02, 2012 6:51 pm

Re: RT5047 BATC AddOn Board

Post by PE5PVB » Sun Oct 18, 2020 8:16 pm

I've just installed them parallel. In my case I have one demodulator, so I don't have any problems with this.

Post Reply

Return to “The MiniTiouner and MiniTioune Digital Receive Software”