Usecase:
Minituner hardware connected via USB to a Portsdown 2020 (3.5inch). Control via the touchscreen.
How can I select another PID from a received station?
(Our local repeater pi6ehv broadcasts multiple streams in its 5000ks signal, minituner now selects the default / first discovered PID)
Thanks
Henk
PID selection Minitiouner via Portsdown 2020
Re: PID selection Minitiouner via Portsdown 2020
Hi Henk
That feature is not available on the Portsdown 2020. It is available on the Portsdown 4 (Receive menu, Config, TS Video Channel).
You could manually modify the lmvlcff.sh script to play a specific channel, but it would be quite a lot of work to add the option to select it from the touchscreen.
Sadly, I do not have the spare time to make major feature updates to the Portsdown 2020 at the moment.
Dave, G8GKQ
That feature is not available on the Portsdown 2020. It is available on the Portsdown 4 (Receive menu, Config, TS Video Channel).
You could manually modify the lmvlcff.sh script to play a specific channel, but it would be quite a lot of work to add the option to select it from the touchscreen.
Sadly, I do not have the spare time to make major feature updates to the Portsdown 2020 at the moment.
Dave, G8GKQ
Re: PID selection Minitiouner via Portsdown 2020
Thanks for the fast reply Dave.
Good to know its not available, so I dont keep on searching for a non-existing menu option.
I guess this means for now I will skip this use-case.
No worry!
Best regards
Henk PA3GUO
Good to know its not available, so I dont keep on searching for a non-existing menu option.
I guess this means for now I will skip this use-case.
No worry!
Best regards
Henk PA3GUO