Reloaded the Micro SD (again)
Posted: Tue Dec 05, 2023 5:18 pm
Having had various and unending problems with my Portsdown starting with startup problems, I've reloaded the Micro SD several times.
The last build seemed to work all OK except that when working through my local repeater I got a red screen which said 'No Video'.. Even though I could see Video on the Monitor Function and on my local Receiver.
I had previous problems when loading the SD Card using the 3 Network, so once again swapped the SIM from my EE Phone into the MODEM Router.. During the build there are many "Failed: Connection Timed out" messages but on the whole they seemed to work on the second try.
However.. I got this little lot during the loading of the LimeSuite routines..
Is this just going to cause me more problems?
,
,
,
The last build seemed to work all OK except that when working through my local repeater I got a red screen which said 'No Video'.. Even though I could see Video on the Monitor Function and on my local Receiver.
I had previous problems when loading the SD Card using the 3 Network, so once again swapped the SIM from my EE Phone into the MODEM Router.. During the build there are many "Failed: Connection Timed out" messages but on the whole they seemed to work on the second try.
However.. I got this little lot during the loading of the LimeSuite routines..
Is this just going to cause me more problems?
,
,
,
- Putty.png (263.77 KiB) Viewed 7995 times