My issue is now resolved by purchasing a Logitech USB camera as recommended by the BATC info.
Thanks for help
Nigel M0NDE
Connecting and testing the pi cam with Portsdown 4
Re: Connecting and testing the pi cam with Portsdown 4
I found on the net a HDMI to CSI converter, to emulate a Pi Cam using any HDMI source
so I installed it in my Portsdown 4, connected the converter to the cam connector on the Raspberry and my camcorder on the HDMI side
Now with the "Pi cam monitor" in Menu 2 I can see the vidéo of my camcorder ! works great !
unfortunately when I specify Pi Cam as source in menu 1 and switch TX on, the camcorder image appears on the screen but he Portsdown doesnt go to Transmission ...
its a pity, possibility to use HDMI source should be a great improvement !
73 all, Gil F5CAU
so I installed it in my Portsdown 4, connected the converter to the cam connector on the Raspberry and my camcorder on the HDMI side
Now with the "Pi cam monitor" in Menu 2 I can see the vidéo of my camcorder ! works great !
unfortunately when I specify Pi Cam as source in menu 1 and switch TX on, the camcorder image appears on the screen but he Portsdown doesnt go to Transmission ...
its a pity, possibility to use HDMI source should be a great improvement !
73 all, Gil F5CAU
Re: Connecting and testing the pi cam with Portsdown 4
Unfortunately, the H264 encoding software written by Evariste F5OEO that is used in the Portsdown does not work with these HDMI to CSI adaptors.
The Pi Cam monitor used on Menu 2 and the Viewfinder used during transmit use different software.
Perhaps ask Evariste?
Dave, G8GKQ
The Pi Cam monitor used on Menu 2 and the Viewfinder used during transmit use different software.
Perhaps ask Evariste?
Dave, G8GKQ
Re: Connecting and testing the pi cam with Portsdown 4
Just to say thanks for a very useful thread...I had been puzzling for an hour or so why my Portsdown 4 would transmit a testcard but not images from the attached PiCam.
I hadn't realised that without an audio source, the audio setting has to be set to "off"...otherwise no output.
73
Graham G3VZV
I hadn't realised that without an audio source, the audio setting has to be set to "off"...otherwise no output.
73
Graham G3VZV