Win32diskimager and Win 11

[M1ASR]

Dear all, I needed to build a new Portsdown 2020 SD card and Win32diskimager wouldn’t work. I used the Raspberry Pi imager in the end, which worked ok. Anyone found a version that works with Windows 11. Thank you in advance. Graham M1ASR

[Basil]

I think BalenaEtcher is supposed to be Windows 11 compatible, but I don't run 11 so haven't tried it.

https://etcher.balena.io/

[M1ASR]

Thank you for your reply, I have now tried balenaetcher and can confirm that it works fine on Windows 11.

Regards
73, Graham M1ASR

[M0DTS]

If you like a simple exe with no installer then Rufus has worked well for me.
https://rufus.ie/en/

Rob

[M1ASR]

Thanks Rob, will take a look,

Regards
73, Graham M1ASR

[g6hfs]

I have always used Raspberry Pi imager never had a problem

Brian

[G8KOE]

I use BalenaEtcher with Windows 11.
Simple to use and just works.

Martin
G8KOE

[M1ASR]

Yes, Balena Etcher and rpi imager are both fine. Just written a Portsdown 2020 SD Card with etcher and rpi imager in Windows 11. Thank you for all the replies.

Regards
73, Graham M1ASR