Portsdown 4 and MiniTiouner V2

Discussion about this major DATV Project. See https://wiki.batc.org.uk/The_Portsdown_Transmitter
Post Reply
G8KOE
Posts: 178
Joined: Fri Aug 09, 2019 8:14 am

Portsdown 4 and MiniTiouner V2

Post by G8KOE » Wed Jun 08, 2022 9:16 am

Hi,

If I fit the RT5047 current limit PCB is this controllable from Portsdown 4 software?
0v 13v or 18v

Martin
G8KOE

G8KOE
Posts: 178
Joined: Fri Aug 09, 2019 8:14 am

Re: Portsdown 4 and MiniTiouner V2

Post by G8KOE » Wed Jun 08, 2022 5:19 pm

Input Port and Voltage Selection
The tuner input port (A = upper, B = lower) can be selected from the Configuration Menu. This setting is stored independently for QO-100 and Terrrestrial.

If the correct hardware is fitted to your tuner, the LNB Voltage can also be set from the Configuration Menu (agauin independently between QO-100 and terrestrial).

I've found the answer to my own question.

Martin
G8KOE

Post Reply

Return to “The Portsdown Digital ATV System”