connector for ADF4351

Discussion about this major DATV Project. See https://wiki.batc.org.uk/The_Portsdown_Transmitter
Post Reply
M0YDH
Posts: 264
Joined: Sat Dec 31, 2016 5:59 pm

connector for ADF4351

Post by M0YDH » Sat May 07, 2022 5:58 pm

Hello
Who can tell what the name or spec of the two row connector on the ADF4351 synthesizer is please? I made a replacement for the first faulty one I had using two JST connectors trimmed and back to back. But this has gone loose. It's stopping the completion of the G8TA centenary Portsdown 2020 :( . I don't want to make another bodged connector. Help please.
73
David M0YDH
Attachments
Pressing the connector to get a signal
Pressing the connector to get a signal
20220507_174308_copy_1008x567.jpg (177.27 KiB) Viewed 1197 times

G8GKQ
Site Admin
Posts: 2794
Joined: Sun Mar 22, 2009 1:21 pm

Re: connector for ADF4351

Post by G8GKQ » Sat May 07, 2022 9:48 pm

Hi David

It’s a standard 0.1 inch pitch 2 by 5 header. I normally use salvaged ribbon cable connectors, but have also soldered directly to the pins on one unit.

Dave

Post Reply

Return to “The Portsdown Digital ATV System”