Hi, all,
is there such a setup that will allow the Portsdown software in repeater mode to use a MiniTiouner as its input source? If yes, are there any guides on how to achieve this?
Thanks,
Jörg
Portsdown and Minitioune for Repeater?
-
- Posts: 1215
- Joined: Wed Jan 06, 2016 9:46 am
Re: Portsdown and Minitioune for Repeater?
Got a vouge feeling that there is a Pluto based DATV repeater concept discussed on the AmsatDL forums.....
Gareth G4XAT
Gareth G4XAT
Re: Portsdown and Minitioune for Repeater?
Hi, Gareth,
I just wonder, a radio friend of mine is receiving with Portsdown 2020 and the Minitioune. I am trying to work out how to enter that mode using the Console Menu (no touch screen). RPi is version 3. The transmit part of the Portsdown is not really needed; apologies that I was unclear about that in my question.
Thanks,
Jörg
I just wonder, a radio friend of mine is receiving with Portsdown 2020 and the Minitioune. I am trying to work out how to enter that mode using the Console Menu (no touch screen). RPi is version 3. The transmit part of the Portsdown is not really needed; apologies that I was unclear about that in my question.
Thanks,
Jörg
Re: Portsdown and Minitioune for Repeater?
Jörg
No, the Portsdown can't be controlled to receive without the use of a touchscreen.
I would suggest rebuilding it as a Ryde and fitting an HDMI display. BUT, you'd need a Raspberry Pi 4 for that.
Dave
No, the Portsdown can't be controlled to receive without the use of a touchscreen.
I would suggest rebuilding it as a Ryde and fitting an HDMI display. BUT, you'd need a Raspberry Pi 4 for that.
Dave