Video Monitor

Discussion about this major DATV Project. See https://wiki.batc.org.uk/The_Portsdown_Transmitter
Post Reply
VK3BVR
Posts: 18
Joined: Fri Sep 18, 2020 10:34 am

Video Monitor

Post by VK3BVR » Fri Nov 13, 2020 6:16 am

Hello Dave,
When I select video monitor on the M2 screen of my Portsdown 4 I only see my Pi Cam with a slight delay compared to the Pi Cam selection.
I would expect to see the video monitor input which is what is transmitted in the M1 TX position.
I suspect it could be because my 7" screen is hinge mounted and the Pi Cam is always connected and it is preventing the video monitor selection.
The C920 monitor on the M2 screen works perfectly and is not overridden by the Pi Cam.
Wondering if I'm doing something wrong or is this an issue.
Regards,
Bob.
Top
Post Reply

Return to “The Portsdown Digital ATV System”