Portsdown Buster 202003280 - New QO-100 Beacon Freqs
Posted: Sat Mar 28, 2020 10:25 am
I have just released a new version of Portsdown Buster (202003280) that has been amended for the new QO-100 Beacon frequency and SR. So the LNB Offset Autoset and the Beacon MER display will both work after software update or for new builds. Simply update from Menu 3, Check for Update.
New builds also include the revised beacon frequency and SR in the list of presets. This will not be included in the update so as not to over-write your current presets. If you wish to, you can amend these figures yourself (RX, Config, Set Preset RX Freqs and Set Preset RX SRs).
Note that I have not updated Portsdown Stretch 2019 yet.
Remember that the Beacon video is not displayed on the Portsdown - it can't handle the full HD as transmitted by the beacon, although you can view it on a PC using UDP to transfer it to VLC.
Dave, G8GKQ
New builds also include the revised beacon frequency and SR in the list of presets. This will not be included in the update so as not to over-write your current presets. If you wish to, you can amend these figures yourself (RX, Config, Set Preset RX Freqs and Set Preset RX SRs).
Note that I have not updated Portsdown Stretch 2019 yet.
Remember that the Beacon video is not displayed on the Portsdown - it can't handle the full HD as transmitted by the beacon, although you can view it on a PC using UDP to transfer it to VLC.
Dave, G8GKQ