Ok I have an I5 too
Do you have default image when you mixing? No problem in OBS but on QO100, i can see two images fusionned , they jump and , I must turn off tx , and after it is ok.
I try to contact you next week, I am in south France
When I am in TX mode on QO100, and I try to do image TRANSITION with OBS, I can see on Minitioun RX two images in same time, many pixels, and images jump quickly.
I must stop TX, TX again and transition can finished.
If I contact you, I could you done see.
All best John
I was just playing around with OBS to Portsdown and found the following :
Instead of using the @ 18.104.22.168:20000 in between OBS and ffmpeg (and if ffmpeg is on the same PC as OBS), use the "local" address 127.0.0.1:20000
It helps on my side, I have less retries in the ffmpeg window
I have a question : how do you calculate the FFVBitrate ?
73 - Christian
Your Muxer settings and Video encoder settings are excellent!
Am sending a DVB-S2 modulator RTP TS, we had packet loss till I tried your setting
We are going much faster at 5Msym 3/4 8PSK, but works well
If the scene fades to black the encoder has difficulty still it this normal or is there a fix?
The pkt_size=1316&bitrate= 495700
So the 1316 is 7 X 188 packets
What does the 495700 the bitrate achieve?
Thanks again Roger VK5YYY
my pi takes an IP of the router of 192.168.0.37
so i've set this in the files
rem Set appropriately
rem set raspi_ip=22.214.171.124
rem set raspi_ip=10.0.0.1
i just dont seem to be getting the feed to the pi
I have this in the OBS to UDP/ts screen
Input #0, mpegts, from 'udp://126.96.36.199:20000':
Duration: N/A, start: 0.000000, bitrate: N/A
service_name : Service01
Stream #0:0[0x12c]: Video: h264 (High) ( / 0x001B), yuv420p(tv, bt470bg/unknown/unknown, progressive), 768x576, 25 fps, 25 tbr, 90k tbn, 50 tbc
Stream #0:1[0x12d]: Audio: aac (LC) ( / 0x000F), 44100 Hz, mono, fltp, 39 kb/s
Output #0, mpegts, to 'udp://192.168.0.3710000?pkt_size=1316&bitrate=372100':
service_name : M1CDQ
encoder : Lavf58.12.100
Stream #0:0: Video: h264 (High) ( / 0x001B), yuv420p(tv, bt470bg/unknown/unknown, progressive), 768x576, q=2-31, 25 fps, 25 tbr, 90k tbn, 90k tbc
Stream #0:1: Audio: aac (LC) ( / 0x000F), 44100 Hz, mono, fltp, 39 kb/s
Stream #0:0 -> #0:0 (copy)
Stream #0:1 -> #0:1 (copy)
Press [q] to stop, [?] for help
frame= 196 fps= 63 q=-1.0 size= 407kB time=00:00:08.24 bitrate= 404.9kbits/s speed=2.63x
This is my ffmpeg script (the last line of it)
start "Video Transport Stream to Portsdown" C:\ffmpeg\bin\ffmpeg -i "udp://192.168.1.128:7272" -vcodec libx265 -crf 33 -preset superfast -b:v 40k -acodec ac3_fixed -strict experimental -b:a 12k -ar 12000 -vf scale=384:-2:flags=lanczos -r 12 -f mpegts "udp://192.168.1.151:10000?pkt_size=1316"
It does bring up the ffmpeg window, but the Portsdown does not show anything, it still says "Waiting for IP Stream on port 10000"
When I press eg after 20 seconds in OBS the Recording button, the ffmpeg window stops after few seconds, and Portsdown still says "Waiting .."
Output / Recording: udp://192.168.1.128:7272
what do I do wrong ?