Portsdown New Software Problem

Discussion about this major DATV Project. See https://wiki.batc.org.uk/The_Portsdown_Transmitter
Post Reply
pcossins
Posts: 12
Joined: Wed Mar 07, 2012 5:57 am

Portsdown New Software Problem

Post by pcossins » Sun May 05, 2019 3:36 am

Hello Portsdown Users ..

I have an original Portsdown system that was working.

I downloaded an software update today (5/5/2019) via the old menu in Putty and while the update looks very good, after setting parameters and going to TX, all I get is a carrier.(Output is set to 'Portsdown')

Can anyone assist ? Peter VK3BFG

G8GKQ
Site Admin
Posts: 2798
Joined: Sun Mar 22, 2009 1:21 pm

Re: Portsdown New Software Problem

Post by G8GKQ » Sun May 05, 2019 9:15 am

Peter

Please could you post the contents of the file

Code: Select all

/home/pi/rpidatv/scripts/portsdown_config.txt
here?

I don't know where to start looking until I know what you are trying to do.

Do you have a touchscreen? If so, a photo of the info page (Menu 2) would be useful as well.

Dave, G8GKQ

Post Reply

Return to “The Portsdown Digital ATV System”