Case for Portsdown using 7 inch screen.

Discussion about this major DATV Project. See https://wiki.batc.org.uk/The_Portsdown_Transmitter
M0YDH
Posts: 264
Joined: Sat Dec 31, 2016 5:59 pm

Re: Case for Portsdown using 7 inch screen.

Post by M0YDH » Fri Jan 25, 2019 3:04 pm

Eric / Nick
345mmx258mmx145mm ABS Plastic Electronic Project Junction Box Enclosure Case as a search item on Ebay gives a £40.36 product in stock from Hong Kong.

I do wish a club expert would reply to my topic on 7" screen and any chance of composite video out - please. :D
My new Lime Portsdown under construction has a Waveshare A 3.5" screen (regretably) in order to work with FM transmitters via Comp video out. But it'll be small like M0XTD's CAT18 construction competition winner example.

[Off topic :- I pray for a single computer DATV transceiver so my small Portsdown and a Minitiouner could work together from rucsack portable SOTA summits. What does SDRAngel do on Linux? It was doing demod of DVB-S and had the word Viterbi on the display on the YouTube from SignalsEverywhere stream ]

Happy building

David M0YDH

G8GKQ
Site Admin
Posts: 2807
Joined: Sun Mar 22, 2009 1:21 pm

Re: Case for Portsdown using 7 inch screen.

Post by G8GKQ » Fri Jan 25, 2019 3:20 pm

Hi David

What is required to enable composite video output with the 7 inch screen is a Raspberry Pi hardware/device driver expert, not a club expert!

The current situation is as stated on the Wiki: https://wiki.batc.org.uk/Portsdown_Disp ... ouchscreen. I've run out of ideas....

Dave

Post Reply

Return to “The Portsdown Digital ATV System”