Display Selection Menu

Discussion about this major DATV Project. See https://wiki.batc.org.uk/The_Portsdown_Transmitter
Post Reply
g8nop
Posts: 16
Joined: Wed Aug 16, 2017 7:08 pm

Display Selection Menu

Post by g8nop » Fri Jan 18, 2019 5:00 pm

After a loooong time away from my Portsdown build due to ill-health, I returned to it by downloading the latest software last night.
When using the menu to select my Element 14 7" display, I move the red cursor down to the relevant line, press enter and restart.
When started up again the selection has been ignored!
Presumably the small asterisk should move to the new selection shouldn't it?
I'm probably missing something simple.

g0uhy
Posts: 81
Joined: Fri Aug 05, 2011 3:09 pm

Re: Display Selection Menu

Post by g0uhy » Fri Jan 18, 2019 5:11 pm

Hi,

from what I remember you use the space bar to change things and not enter.


73

Malcolm G0UHY

g8nop
Posts: 16
Joined: Wed Aug 16, 2017 7:08 pm

Re: Display Selection Menu

Post by g8nop » Fri Jan 18, 2019 5:54 pm

Thanks for that. I knew it had to be something simple.

73 Pip

Post Reply

Return to “The Portsdown Digital ATV System”