Good camera for Rpi

Discussion about this major DATV Project. See https://wiki.batc.org.uk/The_Portsdown_Transmitter
Post Reply
radiogareth
Posts: 1229
Joined: Wed Jan 06, 2016 9:46 am

Good camera for Rpi

Post by radiogareth » Thu Mar 01, 2018 2:02 pm

I bought one of these https://www.ebay.co.uk/itm/Raspberry-Pi ... 2749.l2649 to use with a RPiZero W and other than having to focus it (big deal), I'm pleased. It comes WITH the IR leds (not the worlds most powerful but functional) that can be enabled/disabled vis the mentioned control pin or via the normal Pi camera red LED control.
Now the RPI camera works as a video feed, I was wondering if there was a spare GPIO pin to add IR control too. Just in case I operate in the dark ;-)
Great SW BTW, impressed by how much is squeezed in, THANKS.

G8GKQ
Site Admin
Posts: 2807
Joined: Sun Mar 22, 2009 1:21 pm

Re: Good camera for Rpi

Post by G8GKQ » Thu Mar 01, 2018 4:51 pm

Sorry Gareth - we've allocated all the GPIOs. Can I suggest a back panel switch?

Dave

radiogareth
Posts: 1229
Joined: Wed Jan 06, 2016 9:46 am

Re: Good camera for Rpi

Post by radiogareth » Fri Mar 02, 2018 10:08 am

It would need to be an illuminated one Dave ;-) Somewhere within the motioneye security camera RPi software (I followed here https://www.raspberrypi-spy.co.uk/2017/ ... tioneyeos/) is buried the ability to turn off the Camera RED LED. It needs a re-boot to make it happen so I presume there is something buried in the camera control SW that can do that. But a switch is the KISS answer at the end of the day....

Post Reply

Return to “The Portsdown Digital ATV System”