Portsdown transmitter blank PCB and SD card in stock

Discussion about this major DATV Project. See https://wiki.batc.org.uk/The_Portsdown_Transmitter
Post Reply
g8gtz
Posts: 1776
Joined: Wed Apr 07, 2010 6:26 pm

Portsdown transmitter blank PCB and SD card in stock

Post by g8gtz » Fri Jan 20, 2017 9:39 am

2 blank PCBs have just been put in the BATC shop today and we should have 5 more within a couple of days and are expecting another 20 next week.

Full parts list and build instructions are on the wiki here: https://wiki.batc.tv/Filter_Modulator_build

Also the pre-programmed SD is on sale in the BATC shop. The San Disk 16 GB cards are pre-programmed with the Portsdown software and are fully up gradeable using the on board menu system. https://wiki.batc.tv/Initial_setup

Happy shopping :-)

g8gtz
Posts: 1776
Joined: Wed Apr 07, 2010 6:26 pm

Re: Portsdown transmitter blank PCB and SD card in stock

Post by g8gtz » Fri Jan 20, 2017 6:06 pm

First 2 sold within minutes!

However another 5 arrived in the post today from Colin and are now in the shop - when they are sold we will have to wait for the batch of 20 from China, hopefully next week :-)

g8gtz
Posts: 1776
Joined: Wed Apr 07, 2010 6:26 pm

Re: Portsdown transmitter blank PCB and SD card in stock

Post by g8gtz » Tue Jan 31, 2017 2:58 pm

10 more modulator filter blank PCBs in stock for those wanting to roll their own. These are limited edition with BATC blue solder resist :o

g8gtz
Posts: 1776
Joined: Wed Apr 07, 2010 6:26 pm

Re: Portsdown transmitter blank PCB and SD card in stock

Post by g8gtz » Tue Jan 31, 2017 9:35 pm

Sold already! Another 15 should be with me tomorrow.....

User avatar
F1FCO
Posts: 8
Joined: Sat May 05, 2012 12:10 pm

Re: Portsdown transmitter blank PCB and SD card in stock

Post by F1FCO » Wed Feb 01, 2017 8:32 am

is it possible to pre-order a PCB or a ready made board ?

F1FCO, Pierre.

g8gtz
Posts: 1776
Joined: Wed Apr 07, 2010 6:26 pm

Re: Portsdown transmitter blank PCB and SD card in stock

Post by g8gtz » Wed Feb 01, 2017 5:18 pm

Hi Pierre - unfortunately our very old shop software does not allow pre-orders :-(

However, there are now another 15 blank PCBs in the shop - no more on order at the moment so, next batch will be at least 3 weeks.

73 Noel

Post Reply

Return to “The Portsdown Digital ATV System”