GPIO Extender board connectors

Discussion about this major DATV Project. See https://wiki.batc.org.uk/The_Portsdown_Transmitter
Post Reply
Phil G3TCU
Posts: 3
Joined: Sun Feb 23, 2025 5:45 pm

GPIO Extender board connectors

Post by Phil G3TCU » Fri Mar 28, 2025 4:00 pm

I have assembled a V2 board (PCB V2.12) with the Molex KK254 right angle connectors listed in the V2-12 parts list and I have only recently ordered the associated straight receptacle housings and have found they won't go in. Have I got some wrong parts or is there a need to mount the right angle headers spaced off the board?

Thanks & 73, Phil G3TCU
Top
G4KLB
Posts: 251
Joined: Wed May 28, 2008 10:46 am

Re: GPIO Extender board connectors

Post by G4KLB » Mon Mar 31, 2025 11:39 pm

Hi Phil,

Sorry for not spotting your post earlier.
The BOM has now been updated on the Wiki.
When originally published there was a severe shortage of many Molex connectors. I must have had the correct ones already in stock :oops:
Top
Post Reply

Return to “The Portsdown Digital ATV System”