hi
i use Narrow band for QO100 on the BATC site with my IPad.
the spectrum is clearly visible, but it is impossible to have the sound.
any idea?
thank you.
73’s
Patrick / F6EXX
Son Ipad
Re: Son Ipad
Hello Patrick,
I take it that you are using the BATC Qatar- Oscar 100 Narrowband WebSDR (CW, SSB,etc.)
I am using an iPad Air 2 with a Bluetooth headset and I get audio without any problems.
I can also get audio directly out of the iPad without Bluetooth or earphones connected.
I am using WLAN.
Just above the spectrum there is a row, View, Allow keyboard:, Waterfall: HTML5, Sound: HTML5 (Orange letters) and a 'Click to start sound' button.
After touching the 'Click to start sound' button the HTML5 letters should turn Green and you will have audio.
You may have to turn up the audio volume (slider bar) and make sure MUTE is unchecked.
Hope this works for you, 73.
Wolfgang
I take it that you are using the BATC Qatar- Oscar 100 Narrowband WebSDR (CW, SSB,etc.)
I am using an iPad Air 2 with a Bluetooth headset and I get audio without any problems.
I can also get audio directly out of the iPad without Bluetooth or earphones connected.
I am using WLAN.
Just above the spectrum there is a row, View, Allow keyboard:, Waterfall: HTML5, Sound: HTML5 (Orange letters) and a 'Click to start sound' button.
After touching the 'Click to start sound' button the HTML5 letters should turn Green and you will have audio.
You may have to turn up the audio volume (slider bar) and make sure MUTE is unchecked.
Hope this works for you, 73.
Wolfgang
Re: Son Ipad
Hello dear Om.
sorry for the delay in my response, but I was away.
thank you for the explanation of the sound on IPad.
thank you.
73’s
Patrick
sorry for the delay in my response, but I was away.
thank you for the explanation of the sound on IPad.
thank you.
73’s
Patrick