POTY problem
Posted: Sat Apr 25, 2020 3:46 pm
I have an issue mounting my POTY feed to a Triax 1.2 mtr dish.
With the end sawn off the LNB and pushed onto the feed I cannot find the correct focal point.
It seems to be with the reflector touching the plastic mount or half way along the feed pipe.
Using an un-modified both NB and WD transponders are fine, but replacing with the modified one only the narrow tansponder is received at reasonable signals.
The wide transponder cannot be received despite being set to 12 volt horizontal.
My question may seem dumb but how do I get the feed to the correct focal point.
With the end sawn off the LNB and pushed onto the feed I cannot find the correct focal point.
It seems to be with the reflector touching the plastic mount or half way along the feed pipe.
Using an un-modified both NB and WD transponders are fine, but replacing with the modified one only the narrow tansponder is received at reasonable signals.
The wide transponder cannot be received despite being set to 12 volt horizontal.
My question may seem dumb but how do I get the feed to the correct focal point.