I had a chat with a friend of mine who has an amazing ability to come up with a mechanical solution for anything.. Thanks Colin..
I had an Octogan dual LNB a techno mate and a venton.
The Vennton was smple as it just involved removing about 5mm off of the horn but the others a little more complex.
Here is how he did it....
First he purchased a B and Q 22mm tank connector as shown above. Only the threaded flange is used, the rest is discarded.
Cut approx. 15mm from the front of the LNB cone and file flat. This should leave a flange, approx. 40 to 42mm diameter, which is also the diameter of the brass flange.
Drill and tap brass flange, 6off, M2.5 (2.1mm drill) holes on a 36mm pitch circle diameter.
osition brass flange on cone flange and spot-drill through. Drill these holes 2.6mm which is clearance for 6off, M2.5 x 8mm long screws.
Finally, screw 22mm connector into brass flange.
Technomate Finished..
Octogan and Venton cannot be added here so will follow
LNB to patch adaption.
Latest News and Discussion about the use of the DATV transponder on Es'hail-2
Re: LNB to patch adaption.
Post by G1BVI » Fri Apr 19, 2019 4:20 pm
- Oct 2.jpg (989.96 KiB) Viewed 2325 times
- oct 1.jpg (686.2 KiB) Viewed 2325 times
Venton Single LNB Modified
- venton.jpg (682.93 KiB) Viewed 2325 times
Installed on the dish
- final 2.jpg (785.76 KiB) Viewed 2325 times
- IMG-20190328-WA0020.jpg (101.92 KiB) Viewed 2325 times
Return to “Es’hail-2 - DATV Transponder”
Jump to
- Forum Admin
- ↳ Announcements
- ↳ Feedback
- ↳ New BATC WebSite and Online Shop
- ATV General Discussion
- ↳ Getting Started?
- ↳ General ATV Discussion
- ↳ DATV - Digital ATV
- ↳ The Portsdown Digital ATV System
- ↳ The Ryde Digital ATV Receiver
- ↳ The WinterHill DATV Receiver
- ↳ The Knucker DVB-T Tuner and Receive Software
- ↳ OpenTuner DATV Receive Software
- ↳ The MiniTiouner and MiniTioune Digital Receive Software
- ↳ LimeSDR Mini
- ↳ Es’hail-2 - DATV Transponder
- ↳ CAT 23 - Midland Air Museum Coventry 6 August 2023
- ↳ CQ-TV, The BATC Magazine
- ↳ ATV Activity and Contest Discussions
- ↳ BATC Bursary Grants
- ↳ Spectrum matters
- ↳ Streaming
- ↳ EMF Compliance
- ↳ Narrow Band DATV (RB-TV)
- ↳ Broadcast Equipment Discussion Zone
- ↳ DXSpot.TV
- ↳ Deutschsprachiges Forum
- ↳ Portsdown DATV Projekt - Deutschsprachiges Forum
- ↳ Minitioune(r) - Deutschsprachiges Forum
- ↳ Events
- ↳ ARISS HamTV
- ↳ Early Digital ATV Equipment
- ↳ DigiThin
- ↳ DigiLite
- ↳ BATC DTX1
- ↳ The Langstone Microwave Transceiver
- ↳ CaribouLite RPi Hat
- Adverts
- ↳ For Sale
- ↳ Wanted
- ↳ BATC Shop
- ATV Repeaters
- ↳ UK ATV Repeaters
- ↳ UK Repeater Details Moving to the BATC Wiki
- ↳ UK ATV Repeater News and Discussion
- ↳ GB3BH
- ↳ GB3CZ
- ↳ GB3DK
- ↳ GB3EN
- ↳ GB3ET
- ↳ GB3EY
- ↳ GB3FB
- ↳ GB3FT
- ↳ GB3FW
- ↳ GB3FY
- ↳ GB3GG
- ↳ GB3GV
- ↳ GB3GW
- ↳ GB3HV
- ↳ GB3IF
- ↳ GB3IT
- ↳ GB3IV
- ↳ GB3JT
- ↳ GB3KM
- ↳ GB3LO
- ↳ GB3LX
- ↳ GB3MV
- ↳ GB3NQ
- ↳ GB3NV
- ↳ GB3PV
- ↳ GB3RT
- ↳ GB3RV
- ↳ GB3SQ
- ↳ GB3TG
- ↳ GB3TM
- ↳ GB3TN
- ↳ GB3TT
- ↳ GB3TV
- ↳ GB3TZ
- ↳ GB3UD
- ↳ GB3VR
- ↳ GB3UT
- ↳ GB3VL
- ↳ GB3VV
- ↳ GB3VX
- ↳ GB3WV
- ↳ GB3YT
- ↳ GB3ZZ
- ↳ Internet-only Repeaters
- ↳ IO91LC
- ↳ IO91WN
- ↳ IO92GQ
- ↳ Overseas ATV Repeaters
- ↳ ATV Repeater Technical Topics
- Archive
- ↳ GB3AT
- ↳ GB3FT
- ↳ GB3FV
- ↳ GB3CT
- ↳ GB3AD
- ↳ GB3BG
- ↳ GB3DH
- ↳ GB3DJ
- ↳ GB3KT
- ↳ GB3NV
- ↳ GB3OT
- ↳ GB3PT
- ↳ GB3TB
- ↳ GB3TX
- ↳ GB3VW
- ↳ GB3XG
- ↳ GB3XT
- ↳ GB3XV
- ↳ GB3XY
- ↳ GB3YT
- ↳ GB3YX
- ↳ For Sale Ads Archive
- ↳ Wanted Ads Archive
- ↳ CAT 13 - Finningley 26/27 October 2013
- ↳ CAT 14 - Basingstoke 6/7 September 2014
- ↳ CAT 15 - Finningley 5/6 September 2015
- ↳ CAT 16 and BGM 2016
- ↳ CAT 17
- ↳ CAT18
- ↳ Mini-Conventions in 2019
- ↳ CAT 20 - Online 24 October 2020
- ↳ CQ-DATV, the e-book magazine
- ↳ CAT 21 - Part 2 Online Saturday 16 October 2021
- ↳ CAT 22 - Online 22 October 2022