Es,hail-2 beacon

Latest News and Discussion about the use of the DATV transponder on Es'hailsat 2
Post Reply
G4CPE
Posts: 39
Joined: Mon Oct 31, 2016 3:59 pm

Es,hail-2 beacon

Post by G4CPE » Thu Nov 29, 2018 12:34 pm

I am receiving this signal on 10.706GHz at about 24.5E. It does not identify but I think it is the engineering beacon.

73 Arthur
Attachments
Screenshot (235).png
Screenshot (235).png (734.72 KiB) Viewed 605 times

OK1PHU
Posts: 2
Joined: Fri Nov 30, 2018 2:28 pm

Re: Es,hail-2 beacon

Post by OK1PHU » Fri Nov 30, 2018 3:54 pm

Hi Arthur,

I am receiving on 10.706GHz the same signal. It could be engineering beacon. I am receiving another one on 11.205GHz. See on this page: http://frequencyplansatellites.altervis ... eEast.html

73 de Pavel OK1PHU
Attachments
11205.jpg
11205.jpg (624.3 KiB) Viewed 442 times
10706.jpg
10706.jpg (755.59 KiB) Viewed 461 times

G4CPE
Posts: 39
Joined: Mon Oct 31, 2016 3:59 pm

Re: Es,hail-2 beacon

Post by G4CPE » Wed Dec 05, 2018 9:29 am

Hi Pavel
Thanks for posting those pics. I observed you had an IF and audio spectrum display on the SDR# which I had not discovered.
I now have them displayed and find them very good for checking on system frequency drift.

73 Arthur

OK1PHU
Posts: 2
Joined: Fri Nov 30, 2018 2:28 pm

Re: Es,hail-2 beacon

Post by OK1PHU » Thu Dec 06, 2018 6:51 pm

Hi Arthur,

move the mouse on the IF Spectrum window, press the left mouse button and move mouse to the left or to the right for fine tuning.

73 de Pavel OK1PHU

Post Reply

Return to “Es’hail-2 - DATV Transponder”