GB3ET: Success finally!

Post Reply
G4FRE
Posts: 197
Joined: Fri May 26, 2017 6:57 am

GB3ET: Success finally!

Post by G4FRE » Mon Apr 05, 2021 11:06 am

With the 23 ele Tonna pointing out of the bedroom window GB3ET is now a decent signal when using the G4DDK preamp/BPF:-

gb3et6.jpg
gb3et6.jpg (218.71 KiB) Viewed 6579 times

I also had a chance to try out my (unboxed) Winterhill single nim receiver, finished yesterday afternoon on a real signal. Its now possible to use it for purposes other than QO100 thanks to the Receiver commander software of G4EWJ:-

gb3etwh2.jpg
gb3etwh2.jpg (55.06 KiB) Viewed 6579 times
Transmitting at it using the Portsdown 4 and 2 amplifiers to give 10W I managed to gain access. The only issue was that the streamer chops off the bottom 15% of the screen hence I had to replace the contest numbers in the middle of the screen with the locator:-
gb3et_tx1.jpg
gb3et_tx1.jpg (47.92 KiB) Viewed 6579 times

This picture, received through the repeater shows my takeoff towards GB3ET. The path length is 60km

gb3et_tx3.jpg
gb3et_tx3.jpg (49.12 KiB) Viewed 6579 times

Post Reply

Return to “GB3ET”