New Duplexer GB3ET

Post Reply
G8DKC
Posts: 268
Joined: Thu Jun 28, 2012 9:39 am

New Duplexer GB3ET

Post by G8DKC » Tue May 26, 2020 8:01 am

New Factory Tuned Duplexer Fitted by John to GB3ET,

Due to Switcher Fault We have re-directed digital output to IO92GQ GB3ET Link,
I hope to travel down to ET in the next month to refurbished system...

Going to IO92GQ GB3ET Link on repeaters page,
If you see the Blue Screen with invite to Tx, have a go as Rx (1249 2M/S) performance very much improved.

GB3ET Stream will be back on soon (off Air Stream Yagi changes), and then 1249 analog input available, same improvements.

Peter

G8DKC
Posts: 268
Joined: Thu Jun 28, 2012 9:39 am

Re: New Duplexer GB3ET Update...

Post by G8DKC » Thu May 28, 2020 9:03 pm

We are Streaming over 4G from site to IO92GQ GB3ET-Link.

Steve M0SKM Dunstable was giving his new P.A. a try out toward ET near Banbury.

I managed to get this frame dispite my flakey 4G stream.

Looking forward to his return, and I can update picture :)

And here it is!

Peter
Attachments
M0SKM-1.png
M0SKM-1.png (382.58 KiB) Viewed 9304 times
M0SKM-2.png
M0SKM-2.png (194.26 KiB) Viewed 9304 times

M0SKM
Posts: 369
Joined: Sun Jul 13, 2014 3:15 pm

Re: New Duplexer GB3ET

Post by M0SKM » Wed Jun 03, 2020 3:20 pm

Took the big PA off Peter and tried 18Watts from the Mitsubishi brick, you'll be pleased to know I can still access ET from Dunstable. I've also found a solution to the Portsdown rebooting when the beam comes round your way, see picture. Changing modes is slightly awkward now. :D

73 Steve
Attachments
Ikea_faraday_cage.jpg
Ikea_faraday_cage.jpg (260.74 KiB) Viewed 9240 times
Find me on D Star through GB7BP

G8DKC
Posts: 268
Joined: Thu Jun 28, 2012 9:39 am

Re: New Duplexer GB3ET

Post by G8DKC » Thu Jun 18, 2020 12:32 pm

Hi Steve, M0SKM,

Sorry I missed this post, better late than never!

Hope you didn't have to queue?

2E0XAY, Steve in Leiester now getting in, added rain storms recently for best performance?

Thanks for update.

Peter

Picture from Steve's shack in Leicester.
Attachments
2E0XAY Testcard.png
2E0XAY Testcard.png (200.84 KiB) Viewed 9113 times
Picture from Steve's shack.png
Picture from Steve's shack.png (227.65 KiB) Viewed 9117 times

G4FRE
Posts: 197
Joined: Fri May 26, 2017 6:57 am

Re: New Duplexer GB3ET

Post by G4FRE » Tue Jun 30, 2020 7:00 pm

No longer receiveable in Malvern IO82UC. Previously receiveable with a MER of ¬5dB

I did receive it in when portable in IO91BV82 on june 21 2020 with a MER of 9dB

Dave
G4FRE

Post Reply

Return to “GB3ET”