Video AGC Project CQTV244

Discussions relating to CQ-TV, the magazine of the British Amateur Television Club (BATC)
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.

Thank you
Post Reply
g8ajn
Posts: 45
Joined: Sun Mar 16, 2008 1:59 pm

Video AGC Project CQTV244

Post by g8ajn » Thu Jul 17, 2014 5:28 pm

The article contains an incorrect picture of the pcb overlay. When developing the board last year a prototype board was made. The layout was altered for the final version and the part numbers were also changed. By mistake I uploaded the early version overlay to the CQTV editor. The circuit diagram is correct, the boards are not affected, they work well and the component numbering on them is correct.
Please refer to my website for the corrected pdf download or get it direct from Cloud http://www.mediafire.com/view/xluzq53s7 ... C2014A.pdf
Apologies for the slip. Thanks to Peter Delaney for pointing it out to me.
RS Part number for the 5k 4mm trimmer pot R7 is 177-346.
Dave G8AJN
Top
Post Reply

Return to “CQ-TV, The BATC Magazine”